Bedienungsanleitung Sony kp 41 px1 (Seite 26 von 224) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Türkisch)

142606

Zoom out

Zoom in

Vorherige Seite

1/224

Nächste Seite

Additional Information when connecting equipment

Connecting a VCR

We recommend you connect your VCR to the D or E socket using a scart lead. If you do not have a scart lead, use the “Manually

Tuning the TV” section of this instruction manual to tune in the VCR signal to TV programme number “0”.

If your video supports Smartlink please refer the "Smartlink" section of this instruction manual.

Connecting to External Audio Equipment

1 To listen to the audio of your projection TV on the Hi-Fi equipment:

Plug in your Dolby Prologic system decoder amplifier to the B sockets on the rear of the projection TV if you wish to amplify

the audio output from the TV.

The output level from B sockets can be varied by adjusting the volume of the headphones. Refer to the “Adjusting the sound”

section of this instruction manual to adjust the volume of the headphones.

To enjoy “Dolby Virtual” sound effect through

your Hi-Fi equipment:

Place the speakers of your equipment in front of

your sitting place and besides the TV set but

keeping a distance of 50 cm from each speaker to

the TV set.

Then by using the menu system, select the menu “Sound

Control” and set “Dolby Virtual” to “On”.

2 To listen to the Dolby amplifier equipment on the projection TV speakers:

Plug in your Hi-Fi equipment to the A socket on the rear of the projection TV

if you wish to listen to the audio output from your Hi-Fi on the projection TV

speaker. If you have a Dolby amplifier, connect the centre output from your amplifier

to the A socket to use the projection TV as a centre speaker. Refer to the “Adjusting the Sound”

section of this instruction manual and set the option "Speaker" to "Centre in".

For mono equipment

Connect the phono plug to the L/G/S/I socket on the front of the TV and select the 2 input signal using the instructions on

this page below.

Select and View the Input Signal

Optional Connections

Using Optional Equipment

1 Connect your equipment to the designated projection TV socket, as it is indicated on the

previous page.

2 Switch on the connected equipment.

3 Press the button repeatedly on your remote control until the correct input symbol

appears on the screen.

Symbol Input signals

• Audio/video input signal through the Euro AV connector C

• RGB input signal through the Euro AV connector C

• Audio/Video input signal through the Euro AV connector D or the

phono sockets H and G.

2 • Audio/S Video input signal through the Euro AV connector D or the

sockets H and F.

……

3 • Audio/Video input signal through the Euro AV connector E.

4 To return to the normal TV picture, press the button on the remote control.

892

PROGR

VIDEO TV

Right Hi-Fi

Speaker

Left Hi-Fi

Speaker

Your sitting position

~50º

01GB.fm Page 27 Monday, June 4, 2001 3:47 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony kp 41 px1 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info