Bedienungsanleitung Sony kp 51ps 2 (Seite 18 von 229) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Türkisch)

142603

Zoom out

Zoom in

Vorherige Seite

1/229

Nächste Seite

Menu System

With this feature you can:

a) Individually attenuate the strength of a channel signal in case of a strong local aerial signal (striped picture).

b) Individually adjust the volume level of each broadcast channel.

c) Normally the automatic fine tuning (AFT) is operating, however you can manually fine-tune the TV to obtain better

reception if the picture is distorted.

d) Preset the AV output for the programme positions of broadcast channels with scrambled signals (eg from a pay TV decoder). In

this way a connected VCR records the unscrambled signal.

Using the "Further Programme Preset" function

1 Press the MENU button on the remote control to display the menu

on the screen.

2 Push the joystick $ to select the symbol, then push z to enter

the Set Up menu.

3 Push the joystick $ or 4 to select Manual Set Up then push to z

to enter.

4 Push the joystick $ or 4 to select Further Programme Preset,

then push z to enter.

5 Push the joystick $ or 4 to select the relevant programme number,

then push z repeatedly to select:

a) ATT (RF attenuator)

b) VOL (Volume Offset)

c) AFT (Automatic Fine Tuning) or

d) DECODER

The selected item changes colour.

6 a) ATT

Push the joystick $ to select On, then press the OK button.

Repeat steps 5 and 6 a) to attenuate other channels.

b) VOL

Push the joystick $ or 4 to adjust the volume level of the

broadcast

channel over a range of -7 to +7, then press the OK button. Repeat

steps 5 and 6b) to adjust the volume level of the other

broadcast

channels.

c) AFT

Push the joystick $ or 4 to fine tune the channel frequency over

a range of -15 to +15, then press the OK button. Repeat steps 5 and

6c) if you wish to fine tune other

broadcast channels.

d) DECODER

Push the joystick $ or 4 to select AV1 (for a decoder connected

to the Scart :1/ ) or AV2 (for a decoder connected to the Scart

:2/q 2 (SMARTLINK)), then press the OK button.

Repeat steps 5 and 6d) to select the AV1 or AV2 output for other

programme positions.

The picture from the decoder connected to the Scart connector

:1/ or :2/q 2 (SMARTLINK) on the back of the

set will appear on this programme number.

7 Press the MENU button to exit and return to the normal TV screen.

The set is now ready for use.

903

PROGR

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Detection

Digital Mode

Colour Tone

Personal

DRC 50

Normal

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Start Auto Tuning

Start

- - - - - - -

Enter:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

- - - - - - -

Manual Set Up

Select: Enter:

Language/Country

Manual Programme Preset

Further Programme Preset

RGB Set Up

Personal ID

Demo

- - - - - - -

Further Programme Preset

Select: Enter:

PROG AFTVOLATT DECODER

Off

PROG AFTVOLATT DECODER

Off

PROG AFTVOLATT DECODER

1 On -5

PROG AFTVOLATT DECODER

1 On -5 2

Off

AV1

AV2

PROG AFTVOLATT DECODER

1On

- 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony kp 51ps 2 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info