Bedienungsanleitung Sony LBT-DJ2I (Seite 24 von 56) (Englisch)

66303

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Notes

• Do not remove the USB device during

transferring or erase operations. Doing so may

corrupt the data on the USB device or damage

the USB device itself.

• Do not connect the system and the USB

device through an USB hub.

• You cannot eject the disc during transferring

from disc to USB.

• When transferring from an MP3 disc, MP3

files are transferred with the same bit rate as

the original MP3 files.

When transferring from other sound source,

the tracks are transferred as 128 kbps MP3

files.

• While transferring from an MP3 disc, no

sound is output.

• If you cancel the transferring partway, an

MP3 file is created up to the point when the

transferring was stopped.

• Transferring stops automatically if:

– the USB device runs out of space during

transferring.

– the number of audio files on the USB device

reaches the limit for the number that the

system can recognize.

• A folder that contains non-audio format files

or sub folders cannot be erased.

• The maximum number of folders that can be

created on a single USB device by this system

is 997.

The maximum number of MP3 files that can

be created on a single USB device by this

system is 999.

The maximum number of audio files and

folders may vary depending on the audio file

and folder structure.

• If a folder or file that you are trying to transfer

already exists on the USB device with the

same name, a sequential number is added after

the name without overwriting the original

folder or file.

• If you perform transferring after the erase

operation, the new transferred files or folders

may have the name that same as the erased

files or folders. Therefore, the playback

sequence may different from the transferring

sequence.

Listening to music of

an USB device

You can listen to music stored in an

optional USB device by connecting it to

the (USB) port on the unit.

The audio formats that can be played back

by this system are as follows:

MP3*/WMA*/AAC*

When playback from a USB device, you

can select the internal memory or memory

card as a playback source. For details, see

steps 1 to 6 of “To select the transferring

destination on the USB device” (page 22).

See “Compatible devices with this

system” (page 52) for a list of USB

devices that can be connected to this

system.

* Files with copyright protection (Digital

Rights Management) cannot be played back

by this system.

Files downloaded from an online music store

may not be played back by this system.

1 Press USB (or FUNCTION +/– on

the remote repeatedly to select

“USB”).

2 Connect an optional USB device

to the (USB) port on the

unit.

When the USB device is connected,

the display changes as follows:

USB Reading t volume label*

* “Storage Drive” appears when there is no

volume label assigned to the USB device.

“WALKMAN” appears when a Sony

digital music player is connected.

Note

Depending on the type of USB device, it

may take a few seconds before “USB

Reading” appears in the display.

3 Press HS on CHANNEL B

(or N on the remote).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony LBT-DJ2I Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony LBT-DJ2I

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info