Bedienungsanleitung Sony LCD Dtat Projector (Seite 11 von 108) (Englisch, Französisch, Spanisch)

499137

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

11 (GB)

5 INPUT key

Selects the input signal. Each time you press the key,

the input signal switches as follows:

INPUT C is not displayed when INPUT C FUNC. is

set to OFF in the INSTALL SETTING menu.

6 APA (Auto Pixel Alignment) key

Adjusts a picture to be projected clearest

automatically while a signal from the computer is

input. Adjusts the shift (up/down and left/right) at the

same time automatically. (Only when inputting a

RGB (analog) signal from the computer).

Note

Press the APA key when the full image is displayed

on the screen. If there are black edges around the

image, the APA function will not function properly

and the image may extend beyond the screen.

7 MENU key

Displays the on-screen menu. Press again to clear the

menu.

8 ENTER key

Enters the settings of items in the menu system.

9 RESET key

Resets the value of an item back to its factory preset

value. This key functions when the menu or a setting

item is displayed on the screen.

Location and Function of Controls

3 Indicators

TEMP (Temperature)/FAN

• Lights up when temperature inside the projector

becomes unusually high.

• Flashes when the fan is broken.

LAMP/COVER

• Lights up when the lamp has reached the end of

its life or becomes a high temperature.

• Flashes when the lamp cover or air filter is not

secured firmly.

POWER SAVING

Lights up when the projector is in the power

saving mode. When POWER SAVING in the

SET SETTING menu is set to ON, the projector

goes into the power saving mode if no signal is

input for 10 minutes. Although the lamp goes out,

the cooling fan keeps running. In the power

saving mode, any key does not function for the

first 40 seconds. The power saving mode is

canceled when a signal is input or any key is

pressed.

ON/STANDBY

• Lights in red when the AC power cord is

plugged into the wall outlet. Once in the

standby mode, you can turn on the projector

with the

I / 1

key.

• Lights in green when the power is turned on.

• Flashes in green while the cooling fan runs after

turning off the power with the

I / 1

key. The

fan runs for about 120 seconds after turning off

the power.

The ON/STANDBY indicator flashes quickly

for the first 40 seconds. During this time, you

cannot turn the power back on with the

I / 1

key.

For details on the LAMP/COVER and the TEMP/FAN

indicators, see page 33 (GB).

(

on / standby

)

key

Turns on the projector when the projector is in the

standby mode. The ON/STANDBY indicator lights in

green when the power is turned on.

When turning off the power, press the I /

key

twice following the message on the screen, or press

and hold the key for about one second.

For details on steps for turning off the power, see “To turn

off the power” on page 20 (GB).

B INPUT-A B INPUT-B B INPUT-C

S-VIDEO b VIDEO b

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony LCD Dtat Projector Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony LCD Dtat Projector

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info