Bedienungsanleitung Sony mds-je780 (Seite 28 von 56) (Englisch)

157185

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Erasing a portion of a track

— A-B Erase Function

You can specify a portion within a track and

erase the portion with ease. You can shift the

desired portion by frame

, minute or second

intervals.

1) 1 frame is 1/86 second.

Example: Erasing a portion of track 2.

1 While the deck is stopped, playing, or

paused, press MENU/NO.

“Edit Menu” appears in the display.

2 Turn AMS (or press ./>

repeatedly) until “A-B Erase?” appears,

then press AMS or YES.

Play starts.

3 Turn AMS (or press ./>

repeatedly) until the number of the track

containing the portion to be erased

appears.

4 While monitoring the sound, press AMS

or YES at the starting point of the

portion to be erased (point A).

“-Rehearsal-” and “Point A ok?” alternate in

the display and the deck repeatedly plays a

few seconds of the track before the point A.

5 Press AMS or YES again if point A is

correct.

“Point B set” appears in the display and

playback for setting the ending point of the

portion to be erased (point B) starts.

If point A is not correct

Adjust point A by turning AMS (or by

pressing

./> repeatedly) while

monitoring the sound, and then press AMS

or YES when you locate the desired starting

point. You can shift the point by 1-frame

intervals (1 frame = 1/86 second).

6 Continue playing the track or press

M to locate the ending point of

the portion to be erased (point B), then

press AMS or YES.

“A-B Ers” and “Point B ok?” alternate in the

display and a few seconds of the track before

point A and after point B play back

repeatedly.

7 Press AMS or YES again if point B is

correct.

“Complete!” appears in the display for a few

seconds, the portion between point A and

point B is erased, and then playback begins

at the start of the track.

If point B is not correct

Adjust point B by turning AMS (or by

pressing

./> repeatedly) while

monitoring the sound, and then press AMS

or YES when you locate the desired ending

point. You can shift the point by 1-frame

intervals (1 frame = 1/86 second).

2) You can shift the point by 2-frame intervals on

the track recorded in Monaural mode or LP2

Stereo mode, and by 4-frame intervals on the

track recorded in LP4 Stereo mode.

Tip

In steps 5 and 7, if you want to shift point A or point B

by a certain number of seconds or minutes, press

m/M repeatedly. You can change the unit by

which the counter advances when you turn AMS (or

press ./> repeatedly).

Note

If “Impossible” appears in the display, you cannot

erase a portion of a track. This happens when you have

edited the same track many times.

This is due to a technical limitation of the MD system

and is not a mechanical error.

rack

umber

Original

tracks

After A-B

ERASE

Point A

Point B

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony mds-je780 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony mds-je780

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info