Bedienungsanleitung Sony MDSJE640 (Seite 24 von 60) (Englisch)

23346

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

masterpage:Leftfilename[\\Win-35\logitecmo\422958711MDSJE640CED\01GB03OPE-CED.fm]

Playing an MD/Playing a specific track

Playing MDs

model name1[MDS-JE640] model name2[MDS-JE440]

[4-229-587-11(1)]

(MDS-JE640 only) You can use Setup Menu to adjust

the analog output level

While the deck is playing, press MENU/NO twice.

“Setup Menu” appears in the display.

Turn AMS (or press

repeatedly) until “Aout”

appears, then press AMS or YES.

Turn AMS (or press LEVEL +/– repeatedly) to adjust the

output signal level, then press AMS or YES.

Press MENU/NO.

Note

When you eject the MD or turn off the deck, the output level is

reset to the factory setting (0.0 dB).

To change the display during playing

Press LEVEL/DISPLAY/CHAR (or DISPLAY)

repeatedly to change the display.

Each press of the button changes the display as follows:

MDS-JE640

Track number and elapsed time of the current

track

The contents of a program (only when “PGM”

lights up)

Disc name and track name

Level of the output signal

MDS-JE440

Track number and elapsed time of the current

track

Track number and remaining time of the current

track

Remaining time of all recorded tracks

The contents of a program (only when “PGM”

lights up)

Track name

You can check the remaining time

Press TIME during playback (MDS-JE640 only). Each press of

the button changes the display as follows:

Track number and elapsed time of the current

track

Track number and remaining time of the current

track

Remaining time of all recorded tracks

You can check the track name while playing (only

when the track name is recorded)

Press SCROLL.

The track name appears and scrolls. While the track name is

scrolling, press the button again to pause scrolling, and again to

continue scrolling.

For MDS-JE440, you can also use SCROLL on the deck.

Playing a specific track

While the deck is playing or stopped, use the procedure

below to quickly play any track.

1) Automatic Music Sensor

You can locate the last track of the MD quickly

While the deck is stopped, turn AMS counterclockwise (or press

once).

If you locate a track while the deck is stopped or

paused

The deck will still be stopped or paused at the beginning of the

located track.

Press the number button(s) to enter the track number

of the track you want to play.

To enter a track number over 10

Press >10.

Locating a track with AMS

To go to Do the following:

The next or a succeeding track

during play

Turn AMS clockwise (or press

repeatedly).

A preceding track during play

Turn AMS counterclockwise

(or press

repeatedly).

The beginning of the current

track during play

Turn AMS counterclockwise

(or press

once).

A specific track while the

deck is stopped

Turn AMS (or press

repeatedly) until the track

number you want to go to

flashes in the display, then

press AMS or

Playing a track by entering the track

number

>10

./>

. >

m M

z x

` / 1

AMS

Number buttons

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony MDSJE640 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info