Bedienungsanleitung Sony MDSJE640 (Seite 32 von 60) (Englisch)

23346

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

masterpage:Leftfilename[\\Win-35\logitecmo\422958711MDSJE640CED\01GB03OPE-CED.fm]

Erasing tracks

Editing Recorded MDs

model name1[MDS-JE640] model name2[MDS-JE440]

[4-229-587-11(1)]

Do the procedure below to erase all the tracks, track

names, and disc name at once.

While the deck is stopped, playing, or paused,

press MENU/NO.

“Edit Menu” appears in the display.

Turn AMS (or press

repeatedly) until “All

Erase ?” appears, then press AMS or YES.

“All Erase ??” appears in the display.

Press AMS or YES.

“Complete!!” appears for a few seconds and all the

tracks, track names, and disc name are erased.

To cancel the operation

Press MENU/NO or

You can easily erase a portion of a track by specifying the

starting and ending points of the erasure.

This is useful for erasing the unnecessary portions of a

track recorded from a satellite or FM broadcast.

Example: Erasing portion “B2” of the second

track

While the deck is stopped, playing, or paused,

press MENU/NO.

“Edit Menu” appears in the display.

Turn AMS (or press

repeatedly) until “A-B

Erase ?” appears, then press AMS or YES.

Turn AMS (or press

repeatedly) until the

number of the track containing the portion to be

erased appears, then press AMS or YES.

“-Rehearsal-” and “Point A ok?” alternate in the

display and the deck repeatedly plays several seconds

of the track from the point AMS or YES was pressed.

While monitoring the sound, turn AMS (or press

repeatedly) to locate the starting point of

the portion to be erased (point A).

You can shift the starting point by 1-frame* intervals

(1 frame = 1/86 second).

The time indication (minute, second, and frame) of the

current point is displayed and the deck plays several

seconds of the track to that point repeatedly.

* When recording in Stereo mode, you can shift the starting

point by 2-frame intervals (in Monaural mode and LP2

Stereo mode) or by 4-frame intervals (in LP4 Stereo

mode)

To find a point quickly

Specify a unit (minute, second, or frame) by which the

MD is advanced when you turn AMS (or press

repeatedly).

To do this, press

in step 4 repeatedly to select

minute, second, or frame. The selected unit flashes in

the display.

Repeat step 4 until you have located point A.

Press AMS or YES to enter point A.

“Point B set” appears and the deck starts playing from

point A until the track ends.

Continue playing the track or press

to locate

the ending point of the portion to be erased (point

B), then press AMS or YES.

“A-B Ers” and “Point B ok?” alternate in the display

and a few seconds of the track before point A and after

point B play back repeatedly.

Repeat step 4 until you have located point B.

Press AMS or YES to enter point B.

“Complete!!” appears for a few seconds and the

portion between point A and B is erased.

To cancel the operation

Press MENU/NO or

Note

If “Impossible” appears in the display, you cannot erase a

portion of a track. This happens when you have edited the same

track many times.

This is due to a technical limitation of the MD system and is not

a mechanical error.

Erasing all the tracks on an MD

Erasing a portion of a track

AAA BBB

B1 B3B2

CCC

1 2 3

AAA

B1 B3

CCC

1 2 3

BBB

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony MDSJE640 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info