Bedienungsanleitung Sony MDSJE640 (Seite 37 von 60) (Englisch)

23346

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

masterpage:Rightfilename[\\Win-35\logitecmo\422958711MDSJE640CED\01GB03OPE-CED.fm]

Naming a track or MD/Changing the recorded level after recording

Editing Recorded MDs

model name1[MDS-JE640] model name2[MDS-JE440]

[4-229-587-11(1)]

Do steps 5 to 8 of “Naming a track or an MD using

the controls on the deck” on page 35 or steps 2 to 4

of “Naming a track or an MD using the remote” on

page 36.

Press YES.

The whole name appears in the display, followed by

“Complete!!” to indicate that the labeling procedure is

completed.

Use this function to erase the name of a track or disc.

While the deck is stopped, playing, recording, or

paused, press MENU/NO.

“Edit Menu” appears in the display.

Turn AMS (or press

repeatedly) until

“Name ?” appears, then press AMS or YES.

Turn AMS (or press

repeatedly) until “Nm

Erase ?” appears, then press AMS or YES.

Turn AMS (or press

repeatedly) until the

number of the track (when erasing the track name)

or “Disc” (when erasing the disc name) flashes,

then press AMS or YES.

“Complete!!” appears for a few seconds and the name

is erased.

To cancel the operation

Press MENU/NO or

You can erase all the track names and the disc name on an

MD in a single operation.

While the deck is stopped, playing, or paused,

press MENU/NO.

“Edit Menu” appears in the display.

Turn AMS (or press

repeatedly) until

“Name ?” appears, then press AMS or YES.

Turn AMS (or press

repeatedly) until “Nm

All Ers?” appears, then press AMS or YES.

“Nm All Ers??” appears in the display.

Press AMS or YES.

“Complete!!” appears for a few seconds and all the

names on the MD are erased.

To cancel the operation

Press MENU/NO or

You can erase all the recorded tracks and names on

the MD

For details, see “Erasing all the tracks on an MD” on page 32.

Changing the recorded

level after recording

(S.F EDIT)

You can change the volume of recorded tracks using S.F

(Scale Factor) Edit. The original track is recorded over at

the new recording level. When changing the recording

level, you can select Fade-in Recording to gradually

increase the signal level at the start of recording, or Fade-

out Recording to gradually decrease the signal level at the

end of recording.

For MDS-JE640, press S.F EDIT.

“S.F Edit” appears in the display.

For MDS-JE440, do the following:

Press MENU/NO.

“Edit Menu” appears in the display.

Turn AMS (or press

repeatedly) until “S.F

Edit?” appears, then press AMS or YES.

Turn AMS (or press

repeatedly) until “Tr

Level ?” appears, then press AMS or YES.

Turn AMS (or press

repeatedly) until the

track number you want to change the recording

level appears, then press AMS or YES.

“Level 0dB” appears in the display.

MDS-JE640

While monitoring the sound, turn AMS (or press

repeatedly) to change the recorded level

without turning on the two rightmost indicators on

the peak level meters.

You can set the level at any value between –12 dB and

+12 dB, in 2 dB increments.

Erasing a track or disc name

Erasing all the names on the MD

Changing the overall recording level

AMS

YES

AMSS.F EDIT

Avoid turning on these indicators

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony MDSJE640 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info