Bedienungsanleitung Sony MEX-BT3600 (Seite 19 von 164) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

60673

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

Other functions

Changing the sound settings

Adjusting the sound

characteristics

1 Press the select button repeatedly

until the desired item appears.

2 Rotate the volume control dial to

adjust the selected item.

After 3 seconds, the setting is complete and

the display returns to normal play/reception

mode.

The following items can be set (follow the page

reference for details):

“z” indicates the default settings.

*1 When EQ3 is activated.

*2 When AUX source is activated.

*3 When Bluetooth audio source is activated

(page 18).

Customizing the equalizer curve

— EQ3

“CUSTOM” of EQ3 allows you to make your

own equalizer settings.

1 Select a source, then press the select

button repeatedly to select “EQ3.”

2 Rotate the volume control dial to

select “CUSTOM.”

3 Press the select button repeatedly

until “LOW,” “MID” or “HI” appears.

4 Rotate the volume control dial to

adjust the selected item.

The volume level is adjustable in 1 dB steps,

from –10 dB to +10 dB.

Repeat steps 3 and 4 to adjust the equalizer

curve.

To restore the factory-set equalizer curve,

press and hold the select button before the

setting is complete.

After 3 seconds, the setting is complete and

the display returns to normal play/reception

mode.

Tip

Other equalizer types are also adjustable.

Adjusting setup items — SET

1 Press and hold the select button.

The setup display appears.

2 Press the select button repeatedly

until the desired item appears.

3 Rotate the control dial to select the

setting (example “ON” or “OFF”).

4 Press and hold the select button.

The setup is complete and the display returns

to normal play/reception mode.

Note

Displayed items will differ, depending on the source

and setting.

EQ3

To select an equalizer type: “XPLOD,”

“VOCAL,” “EDGE,” “CRUISE,” “SPACE,”

“GRAVITY,” “CUSTOM” or “OFF” (

z).

LOW*

, MID*

, HI*

(page 19)

To customize the equalizer curve.

BAL (Balance)

To adjust the balance between the right and left

speakers: “RIGHT-10” – “CENTER” (

z) –

“LEFT-10”

FAD (Fader)

To adjust the balance between the front and rear

speakers: “FRONT-10” – “CENTER” (

z) –

“REAR-10”

SUB (Subwoofer volume)

To adjust the subwoofer volume: “+10 dB” –

“0 dB” (

z) – “–10 dB”

(“ATT” is displayed at the lowest setting.)

AUX*

(AUX level)

To adjust the volume level for each connected

auxiliary equipment. This setting negates the

need to adjust the volume level between sources

(page 21).

Adjustable level: “+18 dB” – “0 dB” (

z) –

“–8 dB”

BTA*

To adjust the volume level for each connected

Bluetooth audio device. This setting negates the

need to adjust the volume level between sources

(page 18).

Adjustable level: “+18 dB” – “0 dB” (

z) –

“–8 dB”

continue to next page t

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony MEX-BT3600 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info