Bedienungsanleitung Sony MEX-BT3800U (Seite 25 von 196) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

499133

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

Operating an audio device with this

unit

You can perform the following operations on this

unit if the audio device supports AVRCP (Audio

Video Remote Control Profile) of Bluetooth

technology. (The operation differs depending on

the audio device.)

* Depending on the device, it may be necessary to

press twice.

Operations other than the above should be

performed on the audio device.

Notes

• During audio device playback, information such as

track number/time, playback status, etc., of a

connected audio device is not displayed on this unit.

• Even if the source is changed on this unit, playback

of the audio device does not stop.

Tip

You can connect a cellular phone that supports A2DP

(Advanced Audio Distribution Profile) as an audio

device and listen to music.

Deleting registration of all

paired devices

1 Press and hold (SOURCE/OFF) for 1

second to turn off the power.

2 If “ ” lights, press and hold

(BT) until “ ” turns off.

3 Press and hold the select button.

4 Press the select button repeatedly

until “BT INIT” appears.

5 Press (SEEK) +.

Initializing starts.

It takes 3 seconds to cancel all registration.

Do not turn off the power while “INITIAL” is

flashing.

Other functions

Changing the sound settings

Adjusting the sound

characteristics

1 Press the select button repeatedly

until the desired item appears.

2 Rotate the control dial to adjust the

selected item.

3 Press (BACK).

The setting is complete and the display

returns to normal reception/play mode.

The following items can be set (follow the page

reference for details):

To Press

Play (6) (PAUSE)* on this unit.

Pause (6) (PAUSE)* on this unit.

Skip tracks SEEK –/+ (

./>) [once for

each track]

EQ3

Selects an equalizer curve from 7 music types

(XPLOD, VOCAL, EDGE, CRUISE, SPACE,

GRAVITY, CUSTOM or OFF).

LOW*

, MID*

, HI*

(page 26)

BAL (Balance)

Adjusts the sound balance between the left and

right speakers.

FAD (Fader)

Adjusts the relative level between the front and

rear speakers.

SUB*

(Subwoofer volume)

Adjusts the subwoofer volume.

AUX*

(AUX level)

Adjusts the volume level for each connected

auxiliary equipment: “+18 dB” – “0 dB” – “–8

dB.”

This setting negates the need to adjust the

volume level between sources.

BTA*

(BT-Audio level)

Adjusts the volume level for each connected

Bluetooth audio device: “+18 dB” – “0 dB” –

“–8 dB.”

This setting negates the need to adjust the

volume level between sources (page 24).

*1 When EQ3 is activated.

*2 “ATT” is displayed at the lowest setting, and can be

adjusted up to 21 steps.

*3 When AUX source is activated (page 27).

*4 When Bluetooth audio source is activated

(page 24).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony MEX-BT3800U Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony MEX-BT3800U

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info