Bedienungsanleitung Sony mex bt4700u (Seite 23 von 172) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

168750

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

Customizing the equalizer curve

— EQ3

“CUSTOM” of EQ3 allows you to make your

own equalizer settings.

1 Select a source, then press the select

button repeatedly to select “EQ3.”

2 Rotate the control dial to select

“CUSTOM.”

3 Press the select button repeatedly

until “LOW,” “MID” or “HI” appears.

4 Rotate the control dial to adjust the

selected item.

The volume level is adjustable in 1 dB steps,

from –10 dB to +10 dB.

Repeat steps 3 and 4 to adjust the equalizer

curve.

To restore the factory-set equalizer curve,

press and hold the select button before the

setting is complete.

5 Press (BACK).

The setting is complete and the display

returns to normal play/reception mode.

Tip

Other equalizer types are also adjustable.

Adjusting setup items — SET

1 Press and hold the select button.

The setup display appears.

2 Press the select button repeatedly

until the desired item appears.

3 Rotate the control dial to select the

setting (example “ON” or “OFF”).

4 Press and hold the select button.

The setup is complete and the display returns

to normal play/reception mode.

Note

Displayed items will differ, depending on the source

and setting.

The following items can be set (follow the page

reference for details):

CLOCK-ADJ (Clock Adjust) (page 7)

CT (Clock Time) (page 13, 14)

BEEP

Activates the beep sound: “ON,” “OFF.”

AUX-A*

(AUX Audio)

Activates the AUX source display: “ON,”

“OFF” (page 24).

AUTO OFF

Shuts off automatically after a desired time

when the unit is turned off: “NO,” “30S

(seconds),” “30M (minutes),” “60M (minutes).”

MIC*

– “EXT”: to automatically switch to the external

microphone when it is connected.

– “INT”: to select only the internal microphone.

DEMO

(Demonstration)

Activates the demonstration: “ON,” “OFF.”

DIMMER

Changes the display brightness.

– “AT”: to dim the display automatically when

you turn lights on. (Available only when the

illumination control lead is connected.)

– “ON”: to dim the display.

– “OFF”: deactivate the dimmer.

CONTRAST

Adjusts the contrast of the display. The contrast

level is adjustable in 7 steps.

M.DSPL (Motion Display)

Selects the Motion Display mode.

– “SA”: to show moving patterns and spectrum

analyzer.

– “ON”: to show moving patterns.

– “OFF”: to deactivate the Motion Display.

A.SCRL*

(Auto Scroll)

Scrolls long items automatically: “ON,” “OFF.”

LOCAL (Local Seek Mode)

– “ON”: to only tune into stations with stronger

signals.

– “OFF”: to tune normal reception.

MONO*

(Monaural Mode)

Selects monaural reception mode to improve

poor FM reception: “ON,” “OFF.”

REG*

(Regional) (page 13)

ZAP.TIME*

(Zappin Time)

Selects the playback time for the ZAPPIN

function.

– “ZAP.TIME-1 (about 6 seconds),”

“ZAP.TIME-2 (about 9 seconds),”

“ZAP.TIME-3 (about 30 seconds).”

LPF (Low Pass Filter)

Selects the subwoofer cut-off frequency: “OFF,”

“80Hz,” “100Hz,” “120Hz,” “140Hz,” “160Hz.”

LPF NORM/REV (Low Pass Filter Normal/

Reverse)

Selects the phase when the LPF is on: “NORM,”

“REV.”

continue to next page t

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony mex bt4700u Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info