Bedienungsanleitung Sony mex bt5700u (Seite 23 von 224) (Holländisch)

168758

Zoom out

Zoom in

Vorherige Seite

1/224

Nächste Seite

Bluetooth (Handsfree calling

and Music streaming)

Before using the Bluetooth

function

Bluetooth operations

To use the Bluetooth function, the following

procedure is necessary.

1 Pairing

When connecting Bluetooth devices for the

first time, mutual registration is required. This

is called “pairing.” This registration (pairing)

is required only for the first time, as this unit

and the other devices will recognize each

other automatically from the next time. You

can pair up to 9 devices. (Depending on the

device, you may need to input a passcode for

each connection.)

2 Connection

To use the device after pairing is made, start

the connection. Sometimes pairing allows to

connect automatically.

3 Handsfree calling/Music streaming

You can talk handsfree and listen to music

when the connection is made.

For details of usable devices, visit the following

support site.

Configuring Bluetooth Settings

Before connecting to a Bluetooth device,

configure the Bluetooth Settings on this unit.

1 Press (BT).

The Bluetooth settings menu appears.

2 Rotate the control dial until the

desired menu item appears, then

press the select button.

Depending on the setting, by rotating the

control dial again, other items can be set.

3 Rotate the control dial to select the

setting, then press the select button.

To return to the previous display

Press (BACK).

To exit the Bluetooth settings menu

Press (BT).

Bluetooth Settings menu

Support site

http://support.sony-europe.com/

Signal

Switches the Bluetooth signal output of this unit

to “on” or “off.”

– “on”: to output the Bluetooth signal.

– “off”: to not output the Bluetooth signal.

Be sure to set to “on” when you connect from a

Bluetooth device.

Visibility

Allows other Bluetooth devices to search for

this unit.

– “Show”: to allow the other device to search.

– “Hide”: to not allow the other device to search.

Be sure to set to “Show” when you search for

this unit from a Bluetooth device.

Device Name

Changes the name of this unit displayed on

connected device. (Default setting: “XPLOD”)

Select “Rename” and input characters. Up to 13

characters can be input.

To restore “XPLOD,” select “Default.”

Searches for other Bluetooth devices (page 24).

Device List

Shows the list of registered devices.

Select the name of device to connect / to

disconnect from this unit.

To delete all devices, select “Delete All.”

Auto Answer

“off”: to not start a call until (handsfree) is

pressed.

– “Short”: to start a call automatically when

received, about 3seconds later.

– “Long”: to start a call automatically when

received, about 10seconds later.

Ringtone

Switches the ring tone.

– “Cellular*

”: to output the ring tone set with

the cellular phone.

– “Default”: to output this unit’s ring tone.

EC/NC Mode*

(Echo Canceller/Noise

Canceller Mode)

Reduces echo and noise in phone call

conversations.

Set to “Mode 1” normally. If the quality of the

outgoing sound is unsatisfactory, set to “Mode

2” or “off.”

continue to next page t

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony mex bt5700u Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony mex bt5700u

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info