Bedienungsanleitung Sony MEX-M72BT (Seite 33 von 144) (Englisch, Französisch, Spanisch)

752851

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

33GB

Echo or noise occurs in phone call

conversations.

Lower the volume.

Set EC/NC Mode to [EC/NC-1] or [EC/NC-2]

(page 20).

If the ambient noise other than the phone

call sound is loud, try reducing this noise.

E.g.: If a window is open and outside

noise, etc., is loud, shut the window. If an

air conditioner is loud, lower the air

conditioner.

The phone is not connected.

When BLUETOOTH audio is played, the

phone is not connected even if you press

CALL.

– Connect from the phone.

The phone sound quality is poor.

Phone sound quality depends on

reception conditions of cellular phone.

– Move your boat to a place where you

can enhance the cellular phone’s signal

if the reception is poor.

The volume of the connected audio device

is low (high).

Volume level will differ depending on the

audio device.

– Adjust the volume of the connected

audio device or this unit (page 24).

The sound skips during playback of a

BLUETOOTH audio device.

Reduce the distance between the unit and

the BLUETOOTH audio device.

If the BLUETOOTH audio device is stored in

a case which interrupts the signal, remove

the audio device from the case during use.

Several BLUETOOTH devices or other

devices which emit radio waves are in use

nearby.

– Turn off the other devices.

– Increase the distance from the other

devices.

The playback sound stops momentarily

when the connection between this unit

and the cellular phone is being made. This

is not a malfunction.

The connected BLUETOOTH audio device

cannot be controlled.

Check that the connected BLUETOOTH

audio device supports AVRCP.

Some functions do not work.

Check if the connecting device supports

the functions in question.

A call is answered unintentionally.

The connecting phone is set to answer a

call automatically.

Pairing failed due to a timeout.

Depending on the connecting device, the

time limit for pairing may be short.

– Try completing the pairing within the

time.

Cannot pair.

The unit may not be able to pair with a

previously paired BLUETOOTH device after

initializing the unit if the pairing

information of the unit is on the

BLUETOOTH device. In this case, delete

the pairing information of the unit from

the BLUETOOTH device, and then pair

them again.

BLUETOOTH function cannot operate.

Turn off the unit by pressing OFF for more

than 2 seconds, then turn the unit on

again.

No sound is output from the boat

speakers during handsfree call.

If the sound is output from the cellular

phone, set the cellular phone to output

the sound from the boat speakers.

“Siri Eyes Free” is not activated.

Perform the handsfree registration for an

iPhone that supports “Siri Eyes Free”.

Set the Siri function on the iPhone to on.

Cancel the BLUETOOTH connection with

the iPhone and the unit, and reconnect.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony MEX-M72BT Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony MEX-M72BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info