Bedienungsanleitung Sony mfm ht205s (Seite 24 von 133) (Englisch, Französisch, Spanisch)

142608

Zoom out

Zoom in

Vorherige Seite

1/133

Nächste Seite

x Automatic picture quality adjustment

function (for PC 2 only)

When the display receives an input signal, it automatically

adjusts the picture’s position and sharpness (phase/pitch), and

ensures that a clear picture appears on the screen (page 36).

If the automatic picture quality adjustment function of this

display seems to not completely adjust the picture

You can make further automatic adjustment of the picture quality for the

current input signal (See “Auto Adjust” below).

If you still need to make further adjustments to the picture

quality

You can manually adjust the picture’s sharpness (phase/pitch) and

position (horizontal/vertical position).

These adjustments are stored in memory and automatically

recalled when the display receives a previously input and

registered input signal.

x Making further automatic adjustments to

the picture quality for the current input

signal (Auto Adjust) (for PC 2 only)

1 Press the MENU button.

The main menu appears on the screen.

2Press the M/m buttons to select (Screen) and

press the OK button.

The “Screen” menu appears on the screen.

3 Press the M/m buttons to select “Auto Adjust” and

press the OK button.

Make the appropriate adjustments of the screen’s phase, pitch

and horizontal/vertical position for the current input signal

and store them.

4Press the M/m buttons to select the desired mode

and press the OK button.

• OK: To start adjusting.

• Cancel: To cancel adjustments.

x Adjusting the picture’s sharpness manually

(Phase/Pitch) (for PC 2 only)

You can adjust the picture’s sharpness as follows.

1 Set the resolution to 1,680 × 1,050 on the computer.

2 Load the CD-ROM.

3 Start the CD-ROM and display the test pattern.

For Windows User

When Auto run operates:

1 Click Display Adjustment tool (Utility).

2 Click “Adjust” and confirm the resolution and then click

“Next.”

Test pattern for Pitch and Phase appears in order.

When Auto run fails to operate:

1 Open “My Computer” and right click the CD-ROM icon.

Go to “Explorer” and open the CD-ROM icon.

2 Open [Utility] and then select [Windows].

3 Start [Win_Utility.exe].

Test pattern appears.

For Macintosh user

1 Open [Utility] and then select [Mac].

2 Start [Mac_Utility.exe].

Test pattern appears.

4 Press the MENU button.

The main menu appears on the screen.

5 Press the M/m buttons to select (Screen) and

press the OK button.

The “Screen” menu appears on the screen.

6 Press the M/m buttons to select “Phase” and press

the OK button.

The “Phase” adjustment menu appears on the screen.

7 Press the M/m buttons until the horizontal stripes

are at a minimum.

Adjust so that the horizontal stripes are at a minimum.

8 Press the OK button.

The main menu appears on the screen.

If vertical stripes are observed over the entire screen, adjust

the pitch using the following procedures.

9 Press the M/m buttons to select “Pitch” and press

the OK button.

The “Pitch” adjustment menu appears on the screen.

10 Press the M/m buttons until the vertical stripes

disappear.

Adjust so that the vertical stripes disappear.

11 Click [END] on the screen to turn off the test pattern.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony mfm ht205s Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info