Bedienungsanleitung Sony MHC-GN770 (Seite 36 von 48) (Englisch)

554965

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

masterpage:Left

rame\MHC-GN880\MHC-GN880 GB\GB11TRB-E3.fm]

model name [MHC-GN880/GN770/GX9000/GN660]

[4-252-939-12(1)] GB

Should you encounter a problem with your

system, do the following:

1 Make sure the power cord and speaker

cords are connected correctly and firmly.

2 Find your problem in the troubleshooting

checklist below and take the indicated

corrective action.

If the problem persists after doing all of the

above, consult your nearest Sony dealer.

General

The display starts flashing as soon as you

plug in the power cord even though you have

not turned on the system (see step 6 of

“Hooking up the system” (page 8)).

• Press DISPLAY twice while the system is off.

The demonstration disappears.

“– –:– –” appears in the display.

• A power failure occurred. Set the clock (page 11)

and timer settings (pages 27 and 28) again.

The clock setting/radio presetting/timer is

canceled.

• Redo the following:

– “Setting the clock” (page 11)

– “Presetting radio stations” (page 16)

– “Falling asleep to music” and “Waking up to

music” (page 27)

– “Timer recording radio programs” (page 28)

There is no sound.

• Turn VOLUME clockwise (or press

VOLUME + on the remote).

• Make sure the headphones are not connected to

the PHONES jack.

• Check the speaker connections (page 9).

• There is no audio output during Timer Recording.

There is no microphone sound.

• Turn VOLUME (or press VOLUME +/–

repeatedly on the remote) or MIC LEVEL to

adjust the microphone volume.

• Make sure the microphone is connected to the

MIC jack correctly.

There is severe hum or noise.

• Move the system away from the source of noise.

• Connect the system to a different wall outlet.

• Install a noise filter (commercially available) to

the power cord.

The timer cannot be set.

• Set the clock again (page 11).

The timer does not function.

• Check the timer setting and set the correct time

(pages 27 and 28).

• Cancel the Sleep Timer function (page 27).

• You cannot select the Play Timer and Timer

Recording simultaneously.

Troubleshooting

Problems and remedies

When the ?/1 indicator flashes

Immediately unplug the power cord and

check the following items.

• Are the system control cables connected

correctly?

• Are the + and – speaker cords short

circuited?

• Is the voltage selector set to the correct

voltage?

Check the voltage for your region, then

make sure the voltage selector is set

correctly.

• Are you using the supplied speakers?

• Is anything blocking the ventilation holes

on the rear of the system?

After checking the above items and fixing

any problems, plug in the power cord again

and turn on the system. If the ?/1

indicator

still flashes, or if the cause of the problem

cannot be found even after checking all the

above items, consult your nearest Sony

dealer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony MHC-GN770 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info