Bedienungsanleitung Sony mhc rg 220 (Seite 26 von 40) (Englisch)

158912

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Should you encounter a problem with your

system, do the following:

1 Make sure the power cord and speaker

cords are correctly and firmly connected.

2 Find your problem in the troubleshooting

checklist below and take the indicated

corrective action.

If the problem persists after doing all of the

above, consult your nearest Sony dealer.

When the ?/1 indicator flashes

Immediately unplug the power cord and check

the following items.

• Is the voltage selector set to the correct

voltage?

Check the voltage for your region, then make

sure the voltage selector is set correctly.

• Are the + and – speaker cords short-circuited?

• Are you using only the prescribed speakers?

• Is anything blocking the ventilation holes on

the rear of the system?

After checking the above items and fixing any

problems, connect the power cord again and turn

on the system. If the indicator still flashes, or if

the cause of the problem cannot be found even

after checking all the above items, consult your

nearest Sony dealer.

General

The display starts flashing as soon as you

plug in the power cord even though you have

not turned on the system (see step 5 of

“Hooking up the system” (page 6)).

• Press DISPLAY twice while the system is off. The

demonstration disappears.

“– –:– –” appears in the display.

• A power interruption has occurred. Set the clock

(page 8) and timer settings (pages 21 and 22)

again.

The clock setting/radio presetting/timer is

canceled.

• Redo the following:

–“Setting the clock” (page 8)

–“Presetting radio stations” (page 13)

–“Check the setting” (page 21)

–“Timer recording radio programs” (page 21)

There is no sound.

• Press VOL +/– or turn VOLUME control on the

unit clockwise.

• Make sure the headphones are not connected.

• Check the speaker connections (page 6).

• There is no audio output during timer-recording.

Sound comes from one channel, or

unbalanced left and right volume.

• Place the speakers as symmetrically as possible.

• Connect the supplied speakers.

Sound lacks bass.

• Check that the speaker’s + and – jacks are

connected correctly.

There is severe hum or noise.

• Move the system away from the source of noise.

• Connect the system to a different wall outlet.

• Install a noise filter (commercially available) to

the mains line.

The timer cannot be set.

• Set the clock again (page 8).

The timer does not function.

• Check the timer setting and set the correct time

(pages 21 and 22).

• Cancel the Sleep Timer Function (page 20).

The remote does not function.

• Remove the obstacle.

• Move the remote closer to the system.

• Point the remote at the system’s sensor.

• Replace the batteries (R6/size AA).

• Locate the system away from the fluorescent light.

There is acoustic feedback.

• Reduce the volume.

The color irregularity on a TV screen persists.

• Turn off the TV set once, then turn it on after 15

to 30 minutes. If the color irregularity still

persists, place the speakers farther away from the

TV set.

Troubleshooting

Problems and remedies

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony mhc rg 220 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony mhc rg 220

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info