Bedienungsanleitung Sony mhc s 3 (Seite 31 von 36) (Englisch)

158727

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Additional Information

“DAILY 1”, “DAILY 2”, or “REC SELECT” does

not appear when you press TIMER SELECT (or

CLOCK/TIMER SELECT on the remote).

• Set the timer correctly.

• Set the clock.

The remote does not function.

• There is an obstacle between the remote and the

unit.

• The remote is not pointing in the direction of the

unit’s sensor.

• The batteries have run down. Replace the

batteries.

There is acoustic feedback.

• Decrease the volume level.

• Move the microphone away from the speakers or

change the direction of the microphone.

The color irregularity on a TV screen persists.

• Turn off the TV set once, then turn it on after

15 to 30 minutes. If the color irregularity still

persists, place the speakers farther away from the

TV set.

“PROTECT” and “PUSH POWER” appear

alternately.

• A strong signal is input. Turn off the power,

leave the system turned off for a while, then turn

on the power again. If “PROTECT” and “PUSH

POWER” still appear alternately, check the

speaker cords.

Speakers

Sound comes from only one channel or

unbalanced left and right volume.

• Check the speaker connection and speaker

placement.

• The source being played back is monaural.

• Adjust the balance parameters (page 23).

Sound lacks bass.

• Check that the speaker’s + and – terminals are

connected correctly.

CD Player

The CD tray does not close.

• The CD is not placed properly.

The CD will not play.

• The CD is not lying flat in the disc tray.

• The CD is dirty (see page 29).

• The CD is inserted label side down.

• Moisture condensation has built up.

Playback does not start from the first track.

• The player is in Program Play or Shuffle Play

mode. Press PLAY MODE repeatedly until

“1 DISC” or “ALL DISCS” appears.

“OVER” is displayed.

• You have reached the end of the CD or tape by

pressing M to fast forward.

Tape Deck

The tape does not record.

• The tab has been removed from the cassette (see

“To save a tape permanently” on page 29).

• The tape has reeled to the end.

The tape does not record nor play, or there is a

decrease in sound level.

• The heads are dirty (see “Cleaning the tape

heads” on page 30).

• The record/playback heads are magnetized (see

“Demagnetizing the tape heads” on page 30).

The tape does not erase completely.

• The record/playback heads are magnetized (see

“Demagnetizing the tape heads” on page 30).

There is excessive wow or flutter, or the sound

drops out.

• The capstans or pinch rollers are dirty (see

“Cleaning the tape heads” on page 30).

Noise increases, or the high frequencies are

erased.

• The record/playback heads are magnetized (see

“Demagnetizing the tape heads” on page 30).

After pressing N (n) or Z, there is a

mechanical noise, “EJECT” appears in the

display, and the unit enters standby mode

automatically.

• The cassette tape has not inserted correctly.

continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony mhc s 3 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony mhc s 3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info