Bedienungsanleitung Sony nac hd 1 (Seite 105 von 115) (Englisch)

161725

105

Zoom out

Zoom in

Vorherige Seite

1/115

Nächste Seite

NAC-HD1E.GB.3-213-271-11(1)

105

About the self-diagnosis function

A service number

consisting of ve

alphanumeric letters (e.g.,

E 00 11) appears in the

display when the self-

diagnosis function activates to prevent

abnormal operation. When this service

number appears, consult the local

authorized service facility and report this

service number to the service personnel.

How to reset the unit

It is usually unnecessary to reset this unit.

However, on rare occasions, the unit enters

an abnormal state and stops responding

to button or on-screen operations. In this

case, reset the unit by pressing the  (stop)

button together with the / (power)

button on the unit.

About repairing the hard disk

drive



e contents of the hard disk drive may

be checked in case of repair or inspection

during a malfunction or modication.

However, the contents will not be backed

up or saved by Sony.



If the hard disk needs to be formatted or

replaced, it will be done at the discretion

of Sony. All contents of the hard disk

drive will be erased, including contents

that violate copyright laws.

Precautions

On safety



Completely disconnect the power cord (mains

lead) from the wall socket (mains) if it is not going

to be used for an extended period of time. When

unplugging the unit, always grip the plug. Never

pull the cord itself.



Should any solid object or liquid get into the unit,

unplug the unit, and have it checked by qualied

personnel before operating it again.



e AC power cord can be changed only by a

qualied service facility.

On placement



Do not place the unit in an inclined position or

in locations that are extremely hot, cold, dusty,

dirty, or humid or lacking adequate ventilation,

or subject to vibration, direct sunlight or a bright

light.



Be careful when placing the unit on surfaces that

have been specially treated (for example, with

wax, oil, polish) as staining or discoloration of the

surface may result.



If the unit is brought directly from a cold to a

warm location or is placed in a very damp room,

moisture may condense on the lens inside the

CD player, and cause the unit to malfunction. In

this situation, remove the disc, and leave the unit

turned on for about an hour until the moisture

evaporates.

On heat buildup



Heat buildup on the unit during operation is

normal and is not cause for alarm.



Do not touch the cabinet if it has been used

continuously at a high volume because the cabinet

may have become hot.



Do not block the ventilation holes on the bottom

of this unit. Doing so will cause heat to build up

inside the unit, which may cause it to malfunction.

Do not place anything near the unit that may

block the ventilation holes.

When moving the unit

Do not move the unit while a CD is inserted. Doing

so may damage the CD.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony nac hd 1 Seite 105

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony nac hd 1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info