53357
95
Zoom out
Zoom in
Vorherige Seite
1/115
Nächste Seite
NAC-HD1E.GB.3-213-271-13(1)
95
GB
5
Set each item by performing steps 1 to 3
described below.
1
Select one of the following items.
PC name e computer name or IP
address (up to 15 letters/
numbers)
Share name e name that was entered
when the folder was set to be
shared (page 91)
User name e name that was used to
access the computer when the
folder was set to be shared
Password is is needed only if a
password was set for the
shared folder.
2
Enter the information for the item
selected in step 1.
Only alphanumeric characters can be
entered.
3
Select [Conrm].
6
If back up data already exists, go to step 7.
If back up data does not exist, go to step 8.
7
Select [Full backup] or [Incremental
backup].
Full backup e stored audio data
overwrites the existing data.
Incremental
backup
Only audio data dierent from
the existing data is stored.
Back e back up operation is
cancelled and the unit returns
to the previously displayed
screen.
8
Select [Yes].
Backing up starts.
When the back up is completed, “Backup
completed normally.” appears in the display.
To conrm the computer name (when
using Windows XP Professional)
Go to the Start menu and select [Control Panel]
– [System], open the Properties window, and then
click the [Computer Name] tab to see the computer
name in [Full computer name].
To conrm the IP address (when using
Windows XP Professional)
Go to the Start menu and select [Control Panel]
– [Network connection], select the network you are
using, and then click the [Support] tab to see the IP
address.
To cancel the back up operation
1
Select [Cancel] while backing up is in
progress.
A conrmation window appears.
2
Select [Cancel processing].
To restore the back up data
You can restore the back up data in a shared folder
on the computer to the HDD of the unit.
1
Select [Restore backup data] – [Online
Windows shared folder] in the back up setting
window.
2
Set up the PC shared folder and select
[Conrm].
3
Conrm the displayed item and keep
selecting [Yes] after that.
e unit connects to the Internet and the audio
data is conrmed. Aer the conrmation is
completed, the unit starts restoring the audio data
to the HDD.
When the restoration is nished, “Restored
backup data normally.” appears.
If you select [Cancel] while a restoration is in
progress, the restoration operation is cancelled.
95

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sony NAC-HD1E Giga Juke wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sony NAC-HD1E Giga Juke

Sony NAC-HD1E Giga Juke Bedienungsanleitung - Deutsch - 115 seiten

Sony NAC-HD1E Giga Juke Bedienungsanleitung - Holländisch - 16 seiten

Sony NAC-HD1E Giga Juke Bedienungsanleitung - Französisch - 115 seiten

Sony NAC-HD1E Giga Juke Bedienungsanleitung - Italienisch - 115 seiten

Sony NAC-HD1E Giga Juke Bedienungsanleitung - Spanisch - 115 seiten

Sony NAC-HD1E Giga Juke Bedienungsanleitung - Schwedisch - 115 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info