Bedienungsanleitung Sony NAS-CZ1 (Seite 33 von 435) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Finnisch)

53385

Zoom out

Zoom in

Vorherige Seite

1/435

Nächste Seite

Troubleshooting

If a message appears while using the system,

follow the procedures below to correct the

problem.

Network

Cannot Play

• The track cannot be played in the following cases:

– Sampling Rate is other than 32 kHz, 44.1 kHz,

48 kHz.

– The track is not being streamed by linear PCM.

– The track is other than one channel or two

channel.

– The track sampling bits are other than 16 bits.

– The server status is busy.

Check Network

• Check that the Ethernet cable between the system

and the hub or router is firmly connected.

• Check that the hub or router is turned on.

IP Conflict

• Set the IP addresses of the system and other

devices on the network so that there is no

duplication (page 20).

No album

• Register the track as instructed by the operation

manual of the connected server.

• Follow the procedure below and reconnect to the

server.

1. Select “MEDIA SERVERS?” in the network

menu (page 19), then press ENTER.

2. Press ./> repeatedly to select the

desired media server, then press ENTER.

No Server

• Start up the server. M-crew Server can be started

up by the following method:

Right-click the task tray icon, then click “Start

Music Service” in the menu.

• M-crew Server may not be recognizing the

system. Follow the procedure below and check

whether M-crew Server is recognizing the system:

1. Click [Start] – [All Programs] – [M-crew

Server] – [TOOLS] – [EQUIPMENT LIST] in

that order.

2. If the system is not present in the list that

appears in step 1, device registration must be

performed. For details, see the Help or Install

Manual within M-crew Server.

• When setting a firewall other than that provided

with the OS, refer to Troubleshooting in the

Installation Manual included on the supplied

CD-ROM.

• Perform the TCP/IP settings correctly for the

system and the computer (page 20).

Select Server

• Follow the procedure below and reconnect to the

server.

1. Select “MEDIA SERVERS?” in the network

menu (page 19), then press ENTER.

2. Press ./> repeatedly to select the

desired media server, then press ENTER.

Server Error

• Follow the procedure below and reconnect to the

server.

1. Select “MEDIA SERVERS?” in the network

menu (page 19), then press ENTER.

2. Press ./> repeatedly to select the

desired media server, then press ENTER.

Server Close

• Start up the server. M-crew Server can be started

up by the following method:

Right-click the task tray icon, then click “Start

Music Service” in the menu.

• When you want to change the computer’s network

settings, restart the server on this system. This

message disappears after a short time.

WebRadio Error

• Register a station that can be played back on M-

crew Server.

• Connection may be difficult depending on the

internet line status. Wait a bit and then perform the

operation again.

CD/MP3

No Disc

• There is no disc in the player.

Messages

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony NAS-CZ1 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info