Bedienungsanleitung Sony nas z200ir (Seite 55 von 84) (Englisch)

160845

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

NAS-Z200DiR/Z200iR.GB.4-151-738-12(1)

Troubleshooting

“An error occurred while transferring AOSS

information.”, “An error occurred in security

information.”, or “An error occurred while

transferring security key.” appears.



There was an information exchange failure between

the unit and the wireless router/wireless LAN access

point. Wait a while, and then do the AOSS setup

again.



Place the unit and the wireless router/wireless LAN

access point close to each other and do the AOSS

setup again.

“Another device is connected to the access point.

Try again later.” appears.



The AOSS setup is being performed for another

device. Wait a while, and then do the AOSS setup

again.

“Multiple wireless stations/access points in AOSS

mode found. Try again later.” appears.



Multiple wireless routers/wireless LAN access points

in AOSS mode were detected. Wait a while, and then

do the AOSS setup again.

Instant (S-IWS) connection

You cannot set up an Instant (S-IWS) connection

without the Instant (S-IWS)-compatible Sony

wireless station (supplied with Sony “GIGA JUKE”

Music Server).

For troubleshooting related to Instant (S-IWS)

connection, refer to the operating instructions

supplied with your “GIGA JUKE” Music Server.

Playback does not start.



Confirm that a disc is inserted.



Insert the disc with the label side facing forward

(page 25).



The inserted disc is of a kind not supported by the

unit (pages 25, 66).



There is condensation in the disc slot. Remove the

disc, turn off the unit for about 30 minutes, and then

insert the disc again (page 63).



The disc does not conform to the CD standard.



The inserted disc is scratched or dirty.

The sound skips, or the disc will not play.



The disc does not conform to the audio CD standard.



The inserted disc is scratched or dirty.



Move the unit to a location away from vibration (for

example, on top of a stable stand).



At high volume, speaker vibration may cause the

sound to skip.

Some tracks cannot be played.



If you are using a multisession disc with an audio CD

format, only tracks recorded in the first session can

be played.

MP3 files cannot be played.



MP3 files that do not conform with the ISO 9660

Level 1, 2, or Joliet standard are recorded on the disc.



Files without the “.mp3” extension cannot be played.

If a file on a disc is not an MP3 file but has an “.mp3”

extension, the unit tries to play that file and it may

cause noise in the sound or the unit to malfunction.



The files have the “.mp3” extension, but they are in a

format other than MPEG-1 Audio Layer 3.

Playback does not start from the first track.



Shuffle play or shuffle repeat play is selected. Set the

play mode to normal (page 26).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony nas z200ir Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony nas z200ir

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info