Bedienungsanleitung Sony NEX-VG20E (Seite 91 von 117) (Englisch)

577548

Zoom out

Zoom in

Vorherige Seite

1/117

Nächste Seite

Table of Contents Search image Index

press START/STOP and the actual point that

recording movie starts/stops. This is not a

malfunction.

Photo shooting is slow.

The noise reduction function is working. This

is not a malfunction.

The horizontal to vertical ratio of the

movie (16:9 (wide)/4:3) cannot be

changed.

The horizontal to vertical ratio of high

definition image quality (HD) movies is 16:9

(wide).

The auto focus does not function.

The subject is too close. Check the minimum

shooting distance of the lens.

Ambient light is insufficient.

The recording conditions are not suitable for

uto focus. Adjust the focus manually (p. 41).

SteadyShot does not function.

Attach a lens compatible with the SteadyShot

function.

Set [

SteadyShot] to [Active] or [Standard],

[

SteadyShot] to [On] (p. 76).

Flash shooting cannot be done.

Turn on the external flash (sold separately).

The flash is not attached correctly. Reattach

the flash.

The flash cannot be used for movie shooting.

Fuzzy white circular spots appear on

images shot using a flash.

Particles (dust, pollen, etc.) in the air reflected

the flash light and appeared on the image. This

is not a malfunction.

The image taken with flash is too dark.

If the subject is beyond the flash range (the

distance that the flash can reach), the pictures

will be dark because the flash light does not

reach the subject. If the ISO is changed, the

flash range also changes with it.



The subjects passing by the screen very

fast appear crooked.

This is called the focal plane phenomenon.

This is not a malfunction. Because of the way

the image device (CMOS sensor) reads out

image signals, the subjects passing by the lens

rapidly might appear crooked depending on

the recording conditions.

Horizontal stripes appear on the images.

This occurs when recording images under a

fluorescent lamp, sodium lamp, or mercury

lamp. This is not a malfunction.

It may be eliminated by adjusting Shutter

Speed.

Black bands appear when you record a TV

screen or computer screen.

Adjust Shutter Speed (p. 47).

[LCD Brightness ] cannot be adjusted.

You cannot adjust [LCD Brightness ] when:

The LCD panel is closed on your camcorder

with the LCD screen facing out.

The power is supplied from the AC Adaptor.

The iris and/or shutter speed icon blinks

when you press PHOTO halfway.

Since the subject is too bright or too dark, it is

beyond the available range of the camcorder.

Adjust the setting again.

The image is washed out (Flaring)

Light glare appears on the image

(Ghosting)

This can occur when shooting backlit subjects.

When using the zoom lens, attach the lens

hood.

The corners of the image are dark.

Remove the filter or hood. Depending on the

thickness of the filter or improper attachment

of the hood, the filter or the hood may

partially appear in the image. The optical

properties of some lenses may cause the

periphery of the image to appear too dark

(insufficient light).







Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony NEX-VG20E Seite 91

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony NEX-VG20E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info