Bedienungsanleitung Sony NEX-VG30 (Seite 103 von 116) (Englisch)

577544

103

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

103

Table of Contents Search image Index

You bring your camcorder from an air

conditioned car or room into a hot place

outside.

You use your camcorder after a squall or a

shower.

You use your camcorder in a hot and humid

place.

How to prevent moisture condensation

When you bring your camcorder from a cold

place into a warm place, put your camcorder in

a plastic bag and seal it tightly. Remove the bag

when the air temperature inside the plastic bag

has reached the surrounding temperature (after

about 1 hour).

LCD screen

Do not exert excessive pressure on the LCD

screen, as it may cause uneven color and other

damage.

If your camcorder is used in a cold place, a

residual image may appear on the LCD screen.

This is not a malfunction.

While using your camcorder, the back of

the LCD screen may heat up. This is not a

malfunction.

To clean the LCD screen

If hand grease or hand cream remains on the

screen, the coating comes off more easily. Wipe

it early.

The coating may be scratched if you wipe the

screen with a tissue, etc.

If fingerprints and dust get on the screen, it is

recommended that you first remove the dust

with a blower, etc., then use a soft cloth to

remove the fingerprints.

Viewfinder

When no operation has been performed

within a certain period, the viewfinder display

becomes dark to protect from burn-in. The

display returns to normal by operating the

camcorder again.

On adjustment of the touch panel

([Calibration])

The buttons on the touch panel may not work

correctly. If this happens, follow the procedure

below. It is recommended that you connect your

camcorder to the wall outlet (wall socket) using

the supplied AC Adaptor during the operation.







(MENU)  [Setup] 

[

( General Settings)]  [Calibration].



Touch “” displayed on the screen with the

corner of memory card or the like 3 times.

ouch [Cancel] to cancel calibration.

Notes

If you did not press the right spot, try the

calibration again.

Do not use a sharp-pointed object for

calibration. Doing so may damage the LCD

screen.

You cannot calibrate the LCD screen if it is

rotated, or closed with the screen facing out.

On handling the casing

If the casing is soiled, clean the camcorder body

with a soft cloth lightly moistened with water,

and then wipe the casing with a dry soft cloth.

Avoid the following to avoid damage to the

finish:

Using chemicals such as thinner, benzine,

alcohol, chemical cloths, repellent, insecticide

and sunscreen

Handling the camcorder with above

substances on your hands

Leaving the casing in contact with rubber or

vinyl objects for a long period of time

About care and storage of the lens

Wipe the surface of the lens clean with a soft

cloth in the following instances:

When there are fingerprints on the lens

surface

In hot or humid locations

When the lens is exposed to salty air such as

at the seaside

Store in a well-ventilated location subject to

little dirt or dust.

To prevent mold, periodically clean the lens as

described above.













Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony NEX-VG30 Seite 103

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony NEX-VG30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info