Bedienungsanleitung Sony nw-hd1 (Seite 41 von 46) (Englisch)

150445

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

Symptom Case and/or corrective action

The number of tracks that can be

transferred to the player is not

much. (Available recording time

is short.)



The free space in the hard disk of the player is not enough for

the size of audio data you tried to transfer. Transfer back any

unnecessary tracks to increase the free space (



page 31).



Data other than audio data is stored in the hard disk of the

player. Move data other than audio data to the computer to

increase the free space.

Audio data cannot be transferred

back to your computer from the

player.



A computer other than the one used for transfer to the player is

selected as the transfer target. Audio data cannot be transferred

back to a computer other than the one used for transfer to the

player.



The audio data has been deleted from computer you used to

transfer to the player. The audio data cannot be transferred back

to your computer if the track is deleted from the computer used

to transfer to the player.

Audio data is transferred back

to your computer and remaining

transferable count increases

without operations occasionally

when the player is connected to

the computer.



If a track is deleted from the player using the SonicStage

software installed on a computer other than the one used

for transfer to the player, the track will be transferred back

automatically when the player is connected to the computer that

you used for transfer to the player. Therefore, the remaining

transferable count increases automatically.

The operation of the player

becomes unstable while it is

connected to the computer.



A USB hub or USB extension cable is used. Connecting via

a USB hub or USB extension is not guaranteed. Connect the

dedicated USB cable directly to the computer.

“Failed to authenticate Device/

Media.” is displayed on the

computer screen when the player

is connected to the computer.



The player is not connected to the computer properly. Quit the

SonicStage software and verify the connection of the dedicated

USB cable. Restart the SonicStage software.

Others

Symptom Case and/or corrective action

There is no beep sound when the

player is operated.



“Beep” is set to “Off.” Set it to “On” (



page 28).

The player or the USB cradle gets

warm.



The player and the USB cradle may get warm when the battery

is being charged and just after charging because of quick

charge. Besides, the player and the USB cradle may get warm

when transferring a large number of tracks. Leave the player

aside for a while.

The sound is heard from the inside

of the player. The player shakes.



When the built-in hard disk of the player moves, the sound of

operation may be heard, and the vibration of the player occurs.

This is not a malfunction.

Additional Information

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony nw-hd1 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony nw-hd1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info