Bedienungsanleitung Sony NWMS77DR (Seite 51 von 64) (Englisch)

28118

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Other Information

Symptom

Audio files are transferred back to the

computer without operations

occasionally when the Network

Walkman is connected to the computer.

After connecting the Network

Walkman to the computer, “Memory

Stick” is displayed but files cannot be

found.

The operation of the Network

Walkman becomes unstable while it is

connected to the computer.

“Failed to authenticate Device/Media”

is displayed on the computer screen

while connecting the Network

Walkman to the computer.

On recording (Only for NW-MS77DR)

Symptom

The buttons on the recording USB

cradle do not work.

An error occurs while recording.

Cause/Remedy

If an audio file is deleted from your Network Walkman using

SonicStage installed on any computer other than the computer used for

transferring, the file will be transferred back to the computer

automatically when your Network Walkman is connected to the

computer that you used for transferring. Therefore, the remaining

transfer count increases automatically.

• The “Memory Stick” is not inserted.

c Insert the “Memory Stick”.

• There is a problem with the “Memory Stick”.

c Insert the “Memory Stick” and check the display of the Network

Walkman while disconnecting the dedicated USB cable. If an error

message is displayed, follow the message (page 53 to 54).

• The computer once enters the suspend mode then recovers.

c You may not transfer the data properly after the computer recovers

from the suspend mode. Disconnect the dedicated USB cable and

connect the cable again.

USB hub or USB extension cable is used.

c Connecting via a USB hub or USB extension is not guaranteed.

Connect the dedicated USB cable directly to the computer.

Your Network Walkman is not connected to the computer properly.

c Quit the SonicStage software and verify the connection of the

dedicated USB cable. Restart the SonicStage software.

Cause/Remedy

• The recording USB cradle is not turned on.

c Connect the supplied AC power adaptor properly.

• The record select switch is set to “USB/KEY PROTECT.”

c Set the switch to “LINE IN.”

• The recording cable is not connected to the LINE IN jack properly.

c Connect the optical digital cable or the connecting cord (analog

cable) to the LINE IN jack properly.

• Music is not transferred.

c Check whether the recording source (digital/analog audio device) is

playing correctly. Be sure to press the STOP button on the

recording USB cradle to cancel the error message before restarting

recording.

• The unit is in a place subject to vibration.

c If the unit becomes subject to vibration, an error may occur while

recording. Locate the unit in a stable place and press the STOP

button on the recording cradle to cancel the error message before

restarting recording.

continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony NWMS77DR Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony NWMS77DR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info