Bedienungsanleitung Sony PlayStation 3 - CECH-3004 (Seite 43 von 56) (Englisch)

625921

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Before requesting service

Go through this section if you experience difficulty in operating the

PS3™ system. Should any problem persist, contact the appropriate

PlayStation

customer service helpline which can be found within every

PlayStation

3 software manual.

Power

The system does not turn on.

Check that the AC power cord is securely inserted in the system

and the electrical outlet.

When the power button is pressed, the system beeps repeatedly

and then the power indicator will turn off.

The temperature inside the system is becoming too high. Check

whether the system is being used in a location that is too warm.

Ensure that vents are not blocked and that there is adequate airflow

around the system. Press the power button. (The power indicator

will become solid red.) Wait a while, and then turn on the system

again.

Picture

There is no picture on the TV screen.

Check that the cable is securely inserted. Try disconnecting the

cable from the PS3™ system or TV and then reconnecting it.

There may be a problem with the AV cable in use. Try using another

cable that is compatible with the PS3™ system.

Adjust the video input on the TV to match the input connector that is

being used to connect to the PS3™ system.



If the video output settings on the system do not match those of the

cable or TV in use, there may be no picture. If the screen goes

blank, turn off the system. Then, with only the system and the TV

connected, press the system’s power button for more than 5

seconds (until the system beeps a second time) to turn the system

back on. The video output settings will automatically be reset to the

standard definition (SD) resolution.

The picture is distorted.

Check that the cable is securely inserted. Try disconnecting the

cable from the PS3™ system or TV and then reconnecting it.

The Blu-ray Disc (BD) or DVD cannot be played, or the picture is

distorted.

When outputting DVD content or PlayStation

3 format software in

standard definition (SD) resolution, only discs recorded in the PAL

standard can be played.

If the system is connected to a VCR, copy protection encoding on

some BDs and DVDs may cause image distortion, or may cause the

image to become lighter or darker. In such cases, connect the

system to the TV directly. You may also see a similar occurrence if

using a combination TV/VCR unit.

If the BD or DVD does not match the region code set in the system,

it cannot be played. For details, see "Region codes" (

page 49).

Some DVDs are preset with parental control restrictions. Enter the

password that was set in

(Security Settings) to temporarily

increase the parental control level.

If you record video content on DVD-R, DVD-RW, DVD+R or

DVD+RW media using a device such as a DVD recorder, you must

finalise the media before playing it on the PS3™ system. Finalise the

media using the recording device.

Some BDs are preset with parental control restrictions. Enter the

password that was set in

(Security Settings) to change the

parental control level.



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony PlayStation 3 - CECH-3004 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony PlayStation 3 - CECH-3004

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info