Bedienungsanleitung Sony PXW-X160 (Seite 27 von 112) (Englisch)

635802

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

Basic Operation Procedure

Recording

Basic recording can be performed with the

following procedures.

1 Make sure that the necessary devices

are attached to the camcorder and

power is supplied to them.

2 Load the memory card(s).

If you load two SxS memory cards, recording

is continued by automatically switching to

the second card when the first card becomes

full.

3 Open the cover of the lens hood with

lens cover.

4 Slide the power switch to on while

pressing the green button.

The recording screen is displayed on the

LCD/viewfinder screen.

5 Press the record button (page 9).

The recording/tally lamp lights and recording

begins.

6 To stop recording, press the record

button again.

Recording stops and the camcorder enters

STBY (recording standby) mode.

Recording (Full Auto mode)

Press the FULL AUTO button so that the button

indicator lights.

Full Auto mode is turned on, the TLCS (Total

Level Control System) (page 65) is activated,

Auto Iris, AGC (Auto Gain Control), and Auto

Shutter, and ATW (Auto-Tracing White balance)

are set to on. Then, the brightness and white

balance will be automatically adjusted.

When you wish to adjust them manually, turn Full

Auto mode off.

Shooting without suspending while

changing an memory card (Relay

Recording)

When SxS memory cards are loaded in both slot

A and slot B, the camcorder switches

automatically to the other card if the selected card

becomes full during recording.

Notes

• Do not remove the memory card that is recording.

Remove only the memory card in the slot whose access

lamp is turned off during recording.

• If the recordable memory card is loaded into the other

slot when the remaining time of the memory card that

is recording is less than 1 minute, the message “Will

Switch Slots Soon” is displayed. It goes out when the

slot is switched.

• The relay recording function may not work if you start

recording when the remaining time of the memory card

is less than 1 minute. To perform the relay recording

properly, make sure that the remaining time of the

memory card is more than 1 minute.

• The video that is recorded by using the relay recording

function on the camcorder cannot be played seemlessly

on the camcorder.

• To combine the videos that are recorded by using the

relay recording function, use the “Content Browser”

software.

Recording on memory card A and

memory card B simultaneously

(Simultaneously Recording)

You can perform simultaneously recording by

using memory cards in both the memory card A

and memory card B slot.

Set “Setting” in “Simul Rec” of the

Recording menu to “On.”

Notes

• The simultaneously recording function cannot be used

during Slow & Quick Motion mode (page 36) or Clip

Continuous Rec mode (page 37).

• There is a limit to selectable recording formats when

simultaneously recording images to an SD card and

“Memory Stick.” For details, see page 91.

Recording

Basic Operation Procedure

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony PXW-X160 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info