Bedienungsanleitung Sony PXW-X160 (Seite 44 von 112) (Englisch)

635802

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

Connecting to Other Device via Wireless LAN (PXW-X180 only)

Recording

Notes

• It may take a time (for 30 to 60 seconds) until

appears on the screen. Wait until the flashing

“AP” indication for the wireless LAN connection

status on the LCD/viewfinder screen (page 16) is

turned on.

4 Hold the smartphone near the

camcorder.

The smartphone is connected to the

camcorder and “Content Browser Mobile”

starts.

Notes

• Cancel the sleep or screen lock function of the

smartphone in advance.

• Hold the device near to the camcorder without moving

the device until “Content Browser Mobile” starts (1 to

2 seconds).

Connecting to a WPS-compatible device

You can connect the camcorder to a WPS-

compatible device by using the WPS function.

1 Set the camcorder’s wireless LAN

operation mode to the access point

mode by setting “Setting” in “Wi-Fi” of

the System menu to “Access Point.”

Notes

• It may take a time (for 30 to 60 seconds) until the

camcorder is in the access point mode. Wait until

the flashing “AP” indication for the wireless LAN

connection status on the LCD/viewfinder screen

(page 16) is turned on.

2 Activate “WPS” in “Wi-Fi” of the

System menu.

3 Select “Network Setting” > “Wi-Fi

Setting” on the device, then set “Wi-Fi”

to on.

4 Select the camcorder’s SSID from the

SSID list in “Wi-Fi Network” on the

device, then select “WPS Push Button”

in “Option” on the device.

Notes

• The operation method differs depending on the

device.

5 Start the browser on the device, then

access “http://192.168.1.1:8080/

index.html.”

The screen for inputting “User Name” and

“Password” appears.

6 Input the user name and password, then

select “OK.”

For the user name and password of the access

authentication, check “Basic Authentication”

of the System menu (page 85).

Connecting by inputting an SSID and

password on a device

You can connect the camcorder to a device by

inputting an SSID and password on a device.

1 Set the camcorder’s wireless LAN

operation mode to the access point

mode by setting “Setting” in “Wi-Fi” of

the System menu to “Access Point.”

Notes

• It may take time (for 30 to 60 seconds) until the

camcorder is in the access point mode. Wait until

the flashing “AP” indication for the wireless LAN

connection status on the LCD/viewfinder screen

(page 16) is turned on.

2 Select “Network Setting” > “Wi-Fi

Setting” on the device, then set “Wi-Fi”

to on.

3 Connect the device to the camcorder by

selecting the camcorder’s SSID from

the SSID list in “Wi-Fi Network” and

inputting the password on the device.

For the SSID and password of the camcorder,

check “SSID & Password” in “Wi-Fi” of the

System menu (page 85).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony PXW-X160 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info