Bedienungsanleitung Sony PXW-X180 (Seite 32 von 112) (Englisch)

635801

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

Changing Basic Settings

Recording

Shooting with a fixed shutter

Set the shutter speed (cache time).

When you set the SHUTTER switch E to ON,

the fixed shutter is turned on in the mode and with

the shutter speed you specified with “Shutter”

(page 66) of the Camera menu.

Notes

• When “Auto Shutter” in “Auto Exposure” (page 65) of

the Camera menu is set to “On,” the fixed shutter

cannot be selected. Set “Auto Shutter” to “Off.”

Setting with the Camera menu

The shutter mode and shutter speed can be set

with “Shutter” (page 66) of the Camera menu.

Shooting in slow shutter (SLS) mode

The shutter speed is specified in the number of

accumulated frames. Up to 16 frames can be

accumulated in this mode, permitting you to

obtain low-noise clear pictures in low light levels

or surreal pictures with afterimages.

Select “Shutter” (page 66) of the Camera menu

and set the number of accumulated frames with

“SLS Frame.”

Shooting in Auto Shutter mode

The shutter speed is automatically adjusted

according to the picture brightness.

When you set the camcorder to Full Auto mode

(page 27), Auto Shutter is forcibly selected.

When Full Auto mode is off, you can

independently turn Auto Shutter mode on by

setting “Auto Shutter” in “Auto Exposure”

(page 65) of the Camera menu to “On.”

Adjusting the volume of light

(ND filter)

You can record a subject with the proper

brightness by using the ND FILTER switch B

when the recording environment is too bright.

The camcorder has two ND filter modes. You can

switch the mode by using the ND FILTER mode

switch A.

Preset mode

Set the ND FILTER mode switch A to PRESET,

then set the ND FILTER switch B to the

following.

CLEAR: ND filter is not used.

1: Filter level that is set with “Preset1” in “ND

Filter” of the Camera menu. The default setting is

1/4.

2: Filter level that is set with “Preset2” in “ND

Filter” of the Camera menu. The default setting is

1/16.

3: Filter level that is set with “Preset3” in “ND

Filter” of the Camera menu. The default setting is

1/64.

Variable mode

Set the ND FILTER mode switch A to

VARIABLE, then set the ND FILTER switch B

to the following.

CLEAR: ND filter is not used.

1, 2, 3: You can set the filter level from 1/4 to 1/

128 continuously by using the ND control dial

The ND FILTER switch B position (1/2/3) does

not affect the filter level adjustment.

You can select the adjustment mode according to

the shooting conditions.

Preset mode

The color temperature is adjusted to the preset

value (factory setting: 3200K) in this mode.

Select this mode when there is no time to adjust

the white balance or when you wish to fix the

white balance that is set with “Preset White” in

“White” of the Paint menu (page 67).

Adjusting to natural color (White

Balance)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony PXW-X180 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info