Bedienungsanleitung Sony RDR-GX120S (Seite 38 von 88) (Englisch)

60080

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

1 Press TIMER.

2 Press M/m to select the “Day and

Time,” “Mode,” or PlusCode row.

Then press ENTER.

3 Select an item using </, and

adjust using M/m. Then press ENTER.

To make additional changes to items in

different rows, return to step 2. The

adjustable items are listed below.

“Day and Time”:

Sets the date, start time, and stop time,

and selects the programme position or

input source.

The date item changes as follows:

Today y …… y Sat 28.10 (30 days

later) y Sun (every Sunday) y ……

y Sat (every Saturday) y Mon - Fri

(Monday to Friday) y Mon - Sat

(Monday to Saturday) y Daily y

Today

“Mode”:

Selects the recording mode (page 36).

“PDC/VPS”:

Sets the PDC/VPS function. See “About

the PDC/VPS function” below.

“Extend Time”:

Sets the duration in increments of 10

minutes, for a maximum of 60 minutes

when a timer recording is in progress. If

the programme set to be recorded daily or

weekly is extended, the manually

extended time set here will be added to

the subsequent timer recording times.

Note that when “PDC/VPS” is set to

“On,” you cannot make the “Extend

Time” setting.

• If you make a mistake, select the item

and change the setting.

4 Select “OK,” and press ENTER.

The “TIMER LIST” display (page 42)

appears. The TIMER REC indicator

lights up on the front panel and the

recorder is ready to start recording.

Unlike a VCR, there is no need to turn off

the recorder before the timer recording

starts.

To stop recording during timer recording

Press x REC STOP.

Note that it may take a few seconds for the

recorder to stop recording.

About the PDC/VPS function

PDC/VPS signals are transmitted with TV

programmes in some broadcast systems.

These signals ensure that timer recordings are

made regardless of any broadcast delays,

early starts, or broadcast interruptions.

To use the PDC/VPS function

Set “PDC/VPS” to “On” in step 2 above.

When you turn on this function, the recorder

starts scanning the channels before the timer

recording starts. If you are watching TV

when scanning starts, a message will appear

on the TV screen. If you want to watch TV,

switch to your TV’s tuner or turn off the

PDC/VPS channel scan function.

Note that if you turn off the PDC/VPS

channel scan function, the timer recording

will not start.

To temporarily turn off PDC/VPS channel

scan

Press OPTIONS and select “PDC/VPS Scan

Off.”

To ensure that the PDC/VPS function works

properly, turn off the recorder before the

timer recording starts. This will

automatically turn on the PDC/VPS channel

scan function while the recorder remains off.

Rec Mode Adjust

If there is not enough available disc space for

the recording, the recorder automatically

adjusts the recording mode to enable the

entire programme to be recorded. Set “Rec

Mode Adjust” of the “Timer Settings” to

“On” in the “Recording” setup (page 66).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony RDR-GX120S Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony RDR-GX120S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info