Bedienungsanleitung Sony RDR-GX120S (Seite 62 von 88) (Englisch)

60080

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

b Note

Depending on the disc, “4:3 Letter Box” may be

selected automatically instead of “4:3 Pan Scan” or

vice versa.

Component Out

Selects whether or not to output video signals

from the COMPONENT VIDEO OUT jacks.

b Notes

• When you set “Line1 Output” to “RGB,” you

cannot set “Component Out” to “On.”

• When you connect the recorder to a monitor or

projector via only the COMPONENT VIDEO

OUT jacks, do not select “Off.” If you select

“Off” in this case, the picture may not appear.

Progressive Output

If your TV accepts progressive (525p/625p)

format signals, set “Progressive Output” to

“On.” You will enjoy accurate colour

reproduction and high quality images.

1 Select “Progressive Output,” and press

ENTER.

2 Select “On,” and press ENTER.

The display asks for confirmation.

3 Select “Start,” and press ENTER.

The video switches to a progressive

signal for 5 seconds.

4 If video signal appears OK, select “Yes,”

and press ENTER.

If picture is distorted, select “No,” and

press ENTER.

Progressive Mode

DVD software can be divided into two types:

film based software and video based

software. Video based software is derived

from TV and displays images at 25 frames/50

fields (30 frames/60 fields) per second. Film

based software is derived from film and

displays images at 24 frames per second.

Some DVD software contains both Video

and Film.

In order for these images to appear natural on

your screen when output in progressive mode

(50 or 60 frames per second), the progressive

video signal needs to be converted to match

the type of DVD software that you are

watching.

You can fine-tune the progressive 525p/625p

video signal that is output when you set

“Progressive Output” to “On.”

Note that you must connect to a progressive

format TV using the COMPONENT VIDEO

OUT jacks (page 11).

b Note

When picture noise appears after you set the

recorder to progressive format, hold down x, and

press PROGRAM – (minus) on the unit.

Scart Setting

Sets the method of inputting/outputting

signals from the SCART jacks on the rear

panel of the recorder. Select an option for

each of the items below according to the

combination of jacks and methods that you

are going to use.

Line1 Output

Selects a method of outputting video signals

for the LINE 1 – TV jack.

On Outputs the component video

signals. Select this when you

want to view progressive

signals.

Off

Outputs no signals.

16:9

4:3 Letter Box

4:3 Pan Scan

Auto Automatically detects the

software type (Film-based or

Video-based) and selects the

appropriate conversion mode.

Normally select this position.

Video Fixes the conversion mode to

the mode for Video-based

software.

RGB Outputs RGB signals.

Video

Outputs video signals.

S Video Outputs S-video signals.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony RDR-GX120S Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony RDR-GX120S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info