Bedienungsanleitung Sony RDR-GX300 (Seite 90 von 116) (Englisch)

21247

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Audio DRC (Dynamic Range Control) (DVDs

only)

Makes the sound clear when the volume is turned

down when playing a DVD that conforms to

“Audio DRC.” This affects the output from the

following jacks:

– LINE 2 OUT AUDIO L/R jacks

– LINE 1-TV jack

– LINE 3/DECODER jack

– DIGITAL OUT (OPTICAL or COAXIAL) jack

only when “Dolby Digital” is set to “D-PCM”

(page 90).

Downmix (DVDs only)

Switches the method for mixing down to two

channels when you play a DVD which has rear

sound elements (channels) or is recorded in Dolby

Digital format. For details on the rear signal

components, see “Checking the Play Information

and Playing Time” (page 38). This function

affects the output of the following jacks:

– LINE 2 OUT AUDIO L/R jacks

– LINE 1-TV jack

– LINE 3/DECODER jack

– DIGITAL OUT (OPTICAL or COAXIAL) jack

when “Dolby Digital” is set to “D-PCM”

(page 90).

Digital Out

Selects if audio signals are output via the

DIGITAL OUT (OPTICAL or COAXIAL) jacks.

◆To set the digital output signal

The following setup items switch the method of

outputting audio signals when you connect a

component such as an amplifier (receiver) with a

digital input jack.

For connection details, see “Connecting the Audio

Cords” (page 17).

Select “Dolby Digital,” “MPEG,” and “DTS”

after setting “Digital Out” to “On.”

If you connect a component that does not accept

the selected audio signal, a loud noise (or no

sound) will come out from the speakers, and may

affect your ears or cause speaker damage.

• Dolby Digital (DVDs only)

Selects the type of Dolby Digital signal.

Standard Normally select this

position.

TV Mode Makes low sounds clear

even if you turn the volume

down.

Wide

Range

Gives you the feeling of

being at a live performance.

Dolby

Surround

Normally select this

position.

Multi-channel audio signals

are output to two channels

for enjoying surround

sounds.

Normal Multi-channel audio signals

are downmixed to two

channels for use with your

stereo.

On Normally select this

position. When you select

“On,” see “To set the digital

output signal” for further

settings.

Off The influence of the digital

circuit upon the analogue

circuit is minimal.

D-PCM

Select this when the recorder

is connected to an audio

component lacking a built-in

Dolby Digital decoder. You

can select whether the

signals conform to Dolby

Surround (Pro Logic) or not

by making adjustments to

the “Downmix” item in

Audio Setup (page 90).

Dolby

Digital

Select this when the recorder

is connected to an audio

component with a built-in

Dolby Digital decoder.

Settings

Video

Audio

Features

Options

Easy Setup

Audio ATT :

Audio DRC :

Downmix :

Digital Out :

Dolby Digital :

MPEG :

DTS :

Off

Standard

Dolby Surround

D-PCM

PCM

Off

SETUP

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony RDR-GX300 Seite 90

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony RDR-GX300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info