Bedienungsanleitung Sony RDR-GX310 (Seite 75 von 100) (Englisch)

21249

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Settings and Adjustments

Audio Connection

The following setup items switch the method of

outputting audio signals when you connect a

component such as an amplifier (receiver) with a

digital input jack.

For connection details, see “Step 4: Connecting

the Audio Cords” on page 16.

Select “Dolby Digital,” “MPEG,” “DTS,” and

“48kHz/96kHz PCM” after setting “Digital Out”

to “On.”

If you connect a component that does not accept

the selected audio signal, a loud noise (or no

sound) will come out from the speakers, and may

affect your ears or cause speaker damage.

1 Select “Audio Connection” in “Audio,” and

press ENTER.

2 Select “Digital Out,” and press ENTER.

3 Select “On,” and press ENTER.

4 Set the digital output signal.

• Dolby Digital (DVDs only)

Selects the type of Dolby Digital signal.

• DTS (DVD VIDEO only)

Selects whether or not to output DTS signals.

• MPEG (DVD VIDEO only)

Selects the type of MPEG audio signal.

• 48kHz/96kHz PCM (DVD VIDEO only)

Selects the sampling frequency of the audio

signal.

b Notes

• “48kHz/96kHz PCM” setting has no effect when audio

signals are output from the LINE OUT (R-AUDIO-L)

jacks. If the sampling frequency is 96kHz, signals are

simply converted to 96kHz analog signals and output.

• When you use the DIGITAL OUT (OPTICAL or

COAXIAL) jack to listen to MPEG audio signals and

set “MPEG” to “MPEG” in “Audio” setup, no sound

will come from your speakers if you select one of the

TVS modes.

On Normally select this position.

Off The influence of the digital

circuit upon the analogue

circuit is minimal.

D-PCM

Select this when the recorder is

connected to an audio component

lacking a built-in Dolby Digital

decoder. The surround effects of

output signals are determined by

the “Downmix” setting item in

“Audio” setup.

Dolby

Digital

Select this when the recorder is

connected to an audio component

with a built-in Dolby Digital

decoder.

Audio - Audio Connection

Digital Out : On

Dolby Digital :

48kHz/96kHz PCM : 48kHz/16bit

DTS :

MPEG : PCM

Off

D-PCM

On Select this when the recorder is

connected to an audio component

with a built-in DTS decoder.

Off

Select this when the recorder is

connected to an audio component

without a built-in DTS decoder.

PCM

Select this when the recorder is

connected to an audio component

without a built-in MPEG decoder.

If you play MPEG audio sound

tracks, the recorder outputs stereo

signals via the DIGITAL OUT

(OPTICAL or COAXIAL) jack.

MPEG Select this when the recorder is

connected to an audio component

with a built-in MPEG decoder.

48kHz/

16bit

The DVD video audio signal is

converted to 48kHz/16bit and

output.

96kHz/

24bit

All signals containing 96kHz/

24bit are output without

conversion. However, the signals

are output at 48kHz/16bit if

contained.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony RDR-GX310 Seite 75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info