Bedienungsanleitung Sony RDR-GX350 (Seite 44 von 112) (Englisch)

60287

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

“VPS/PDC”: Sets the VPS/PDC

function. See “About the VPS/PDC

function” below.

“Bilingual Recording”: Sets the sound

to be recorded (page 81).

• To enter a title name, select “Set Title

Name” and press ENTER (page 34).

• If you make a mistake, select the item

and change the setting.

4 Select “OK,” and press ENTER.

The “Timer List” display appears

(page 48).

The timer recording indicator lights up

on the front panel display and the

recorder is ready to start recording.

Unlike a VCR, there is no need to turn off

the recorder before the timer recording

starts.

To stop recording during timer recording

Press x REC STOP.

Note that it may take a few seconds for the

recorder to stop recording.

On-screen instructions may appear after

pressing x REC STOP. In this case, follow

the on-screen instructions.

About the VPS/PDC function

VPS/PDC signals are transmitted with TV

programmes in some broadcast systems.

These signals ensure that timer recordings are

made regardless of any broadcast delays,

early starts, or broadcast interruptions.

To use the VPS/PDC function

Set “VPS/PDC” to “On” in step 3 above.

When you turn on this function, the recorder

starts scanning the channels before the timer

recording starts.

Rec. Mode Adjust

If there is not enough available disc space for

the recording, the recorder automatically

adjusts the recording mode to enable the

entire programme to be recorded. Set “Rec.

Mode Adjust” to “On” in the “Recording”

setup (page 86).

If the timer settings overlap

The confirmation screen appears.

To store the setting, select “Yes.”

To cancel the overlapped setting, select “No.”

To confirm, change, or cancel a timer

recording

See “Checking/Changing/Cancelling Timer

Settings (Timer List)” on page 48.

z Hint

You can also display the Timer display by selecting

“Timer Recording” from the System Menu.

b Notes

• Check that the clock is correctly set before setting

the timer recording. If not, the timer recording

cannot be made.

• To record a satellite programme, turn on the

satellite tuner and select the satellite programme

you want to record. Leave the satellite tuner

turned on until the recorder finishes recording. If

you connect equipment with a timer function, you

can use the Synchro Rec function (page 49).

• Even if the timer is set for the same daily or

weekly programme, the timer recording cannot be

made if it overlaps with a programme that has

priority. “Overlap” will appear next to the

overlapped setting in the Timer List. Check the

priority order of the settings (page 48).

• Even if the timer is set, timer recordings cannot be

made while recording a programme that has

priority.

• The “Rec. Mode Adjust” function only works

with a timer recording and the VPS/PDC function

set to off. It does not function with Quick Timer

or Synchro Rec.

• The beginning of some recordings may not be

made when using the VPS/PDC function.

• You cannot extend the recording duration time

when “VPS/PDC” is set to “On.”

• The recording mode cannot be set to “AUTO”

when “VPS/PDC” is set to “On.”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony RDR-GX350 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony RDR-GX350

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info