Bedienungsanleitung Sony RDR-GX350 (Seite 58 von 112) (Englisch)

60287

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

To check the detailed settings for the

selected preset, press DISPLAY.

4 Press SYSTEM MENU to exit.

To create your own setting

1 Select “Memory1,” “Memory2,” or

“Memory3” in step 3.

2 Select “Detailed Settings,” and press

ENTER.

The display for adjusting detailed

settings appears.

3 Select an item using M/m, and adjust

settings using </,.

For details about each setting, see the

explanation of the display.

“Prog. Motion”: Adjusts the progressive

video signal when “Component Video

Out” is set to “Progressive” (page 80) or

when “Screen Resolution” is set to other

than “720 x 576i” (or “720 x 480i”)

(page 90).

Select “Motion” for a picture, including

subjects that move dynamically.

Select “Still” for a picture with little

movement.

“Cinema”: Converts the progressive

video signal to match the type of DVD

software that you are watching when

“Component Video Out” is set to

“Progressive” (page 80) or when “Screen

Resolution” is set to other than “720 x

576i” (or “720 x 480i”) (page 90).

Select “Auto1” to automatically detect

the software type (Film-based or Video-

based) and select the appropriate

conversion mode. Normally select this

position.

If the picture appears unnatural, select

“Auto2,” “On,” or “Off.”

“YNR” (luminance noise reduction):

Reduces noise contained in the

luminance element of the video signal.

“BNR” (block noise reduction): Reduces

“block noise” or mosaic-like patterns in

the picture.

“MNR” (mosquito noise reduction):

Reduces the faint noise appearing around

the outlines of the images. The noise

reduction effects are automatically

adjusted within each setting range

according to the video bit rate and other

factors.

“Sharpness”: Sharpens the outlines of the

images.

“Detail”: Adjusts the sharpness of

images outlines.

“White Enhancer”: Adjusts the intensity

of white.

“Black Enhancer”: Adjusts the intensity

of black.

“Black Level”: Selects the black level

(setup level) for the video signals.

Select “ON” to raise the black level.

Select this when the picture appears too

dark.

Select “OFF” to set the black level of the

input signals to the standard level.

Normally, select this position.

“Gamma Correction”: Adjusts how dark

areas look.

“Hue”: Adjusts the colour balance.

“Chroma Level”: Makes the colours

deeper or lighter.

4 Press SYSTEM MENU to exit.

The setting is automatically stored as the

setting you selected in step 1.

b Notes

• If the outlines of the images on your screen

become blurred, set “BNR” and/or “MNR” to

“Off.”

• Depending on the disc or the scene being played,

the above BNR or MNR effects may be hard to

discern. Also, these functions may not work with

some screen sizes.

• The following settings are not available for the

signals output from the HDMI jack.

– “Sharpness”

– “White Enhancer”

– “Black Enhancer”

– “Black Level”

– “Gamma Correction”

–“Hue”

–“Chroma Level”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony RDR-GX350 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony RDR-GX350

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info