Bedienungsanleitung Sony RDR-GX350 (Seite 97 von 112) (Englisch)

60287

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

Additional Information

Recording does not stop immediately

after you press x REC STOP.

, It will take a few seconds for the recorder to

input disc data before recording can stop.

On-screen instructions may appear after

pressing x REC STOP. In this case, follow

the on-screen instructions.

Recording does not stop after you press

, Press x REC STOP.

Timer recording is not complete or did not

start from the beginning.

, There was a power failure during recording.

If the power recovers when there is a timer

recording, the recorder resumes recording.

Should the power failure continue for more

than 1 hour, reset the clock (page 75).

, Another timer setting overlapped the timer

setting (page 48).

, Disc space was not sufficient.

, The VPS/PDC function is working.

Contents previously recorded were

erased.

, Data that is not playable on this recorder but

was recorded on a DVD with a PC will be

erased from the disc when the disc is

inserted.

The VPS/PDC function does not operate.

, Check that the clock and date are set

correctly.

, Check that the VPS/PDC time you set is

correct (there might be a mistake in the TV

programme guide). If the broadcast you

wanted to record did not send the correct

VPS/PDC information, the recorder will not

start recording.

, If the reception is poor, the VPS/PDC signal

might be altered and the recorder might not

start recording.

Nothing was recorded even though you set

the Synchro-Recording setting correctly.

, You forgot to turn off the connected

equipment. Turn off the connected

equipment and set the recorder to Synchro-

Recording standby mode (page 49).

, The recorder was not set to the Synchro-

Recording standby mode. Set the recorder

to stand by for Synchro-Recording. Make

sure the SYNCHRO REC indicator lights

up in the front panel display (page 49).

, The equipment is not connected to the LINE

1/DECODER jack of the recorder.

, The recorder is connected to the TV output

jack of the connected equipment.

, The Synchro-Recording and another timer

recording overlap (page 50).

Synchro-Recording does not complete.

, The timer setting for the connected

equipment overlapped the recorder’s timer

setting (page 50).

, There was a power failure during the

recording.

, The [/1 button was pressed before

Synchro-recording started.

The recorder automatically starts recording

when the satellite receiver is turned on.

, The Synchro Rec function was activated.

Turn off the satellite receiver and cancel the

Synchro Rec function (page 49).

The clock has stopped.

, Set the clock again (page 75).

, The clock stopped due to a power failure

that lasted for more than 1 hour. Reset the

clock (page 75).

The timer indicator is flashing.

, The disc does not have enough space.

, Insert a recordable disc into the recorder.

, The inserted DVD is protected (page 36).

Recording from the connected

equipment with a timer

Display

,continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony RDR-GX350 Seite 97

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony RDR-GX350

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info