21255
82
Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
82
Options Settings
Options Settings
The Options Setup allows you to set up other operational
settings.
Select “Options” in the Setup Display. To use the display, see
“Using the Setup Displays” (page 74).
The default settings are underlined.
Format Disc (DVD-RW only)
Selects the recording format when formatting a DVD-RW.
Bilingual Recording (for all recordable discs
except DVD-RW in VR mode)
Selects the sound to be recorded on the disc. This setting is not
necessary when recording on DVD-RWs (VR mode) that record
both the main and sub sounds.
Dimmer
Adjusts the lighting of the front panel display.
Auto Display
Command Mode
Changes the Command Mode of the recorder if other DVD
equipment is assigned the same Command Mode. Be sure to
match the Command Mode switch on the remote to the setting
made here. For details, see “Preparing the Remote” in the
separate booklet, “Hookups and Setting.”
Factory Setup
Allows you to select the setup settings by group, and return them
to the default settings. Note that all of your previous settings will
be lost.
1 Follow steps 1 to 3 of “Using the Setup Displays
(page 74) to select “Options” in the Setup Display.
2 Press M/m to select “Factory Setup,” then press
, or ENTER.
The display for selecting the group of settings
appears.
3 Press M/m to select the group of settings you want
to return to default from “Settings,” “Video,”
“Audio,” “Features,” “Options” “Parental
Control,” and “All,” then press , or ENTER.
The dialogue box appears.
4 Press </, to select “Start,” then press ENTER.
The selected settings return to the default settings.
5 Press ENTER when “Finish” appears.
VR Automatically formats the disc in VR
mode.
Video Automatically formats the disc in
Video mode.
Selectable
Allows you to select the format before
formatting.
Main
Records the main sound for the bilingual
programme.
Sub Records the sub sound for the bilingual
programme.
Bright
Bright lighting.
Dark Low lighting.
Off Turns off the lighting.
On
Automatically displays information on the
screen when the recorder is turned on, etc.
Off Displays information only when DISPLAY is
pressed.
DVD1 Select this when the default Command Mode
conflicts with other DVD equipment.
DVD2 Select this when the default Command Mode
conflicts with other DVD equipment.
DVD3
The default Command Mode of the recorder.
82

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sony RDR-GX7 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sony RDR-GX7

Sony RDR-GX7 Bedienungsanleitung - Deutsch - 100 seiten

Sony RDR-GX7 Bedienungsanleitung - Holländisch - 84 seiten

Sony RDR-GX7 Bedienungsanleitung - Holländisch - 100 seiten

Sony RDR-GX7 Bedienungsanleitung - Französisch - 120 seiten

Sony RDR-GX7 Bedienungsanleitung - Italienisch - 84 seiten

Sony RDR-GX7 Bedienungsanleitung - Italienisch - 100 seiten

Sony RDR-GX7 Bedienungsanleitung - Portugiesisch - 96 seiten

Sony RDR-GX7 Bedienungsanleitung - Spanisch - 84 seiten

Sony RDR-GX7 Bedienungsanleitung - Spanisch - 100 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info