Bedienungsanleitung Sony RDR-GX7 (Seite 85 von 96) (Englisch)

21255

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Troubleshooting

Additional Information

TV channels cannot be changed.

, Switch the input selector to TV.

, Connect the aerial cable correctly. (See the separate booklet,

“Hookups and Settings.”)

The picture from equipment connected to the

recorder’s input jack does not fill the screen.

, If the equipment is connected to the LINE 1-TV jack, select

“L1” in the front panel display by pressing PROG +/– or

INPUT SELECT.

If the equipment is connected to the LINE 2 IN jacks, select

“L2” in the front panel display by pressing PROG +/– or

INPUT SELECT.

If the equipment is connected to the LINE 3/DECODER

jack, select “L3” in the front panel display by pressing

PROG +/– or INPUT SELECT.

If the equipment is connected to the LINE 4 IN jacks, select

“L4” in the front panel display by pressing PROG +/– or

INPUT SELECT.

If the equipment is connected to the DV IN jack, (this is

usually for a digital video camera connection), select “DV”

in the front panel display by pressing PROG +/– or INPUT

SELECT.

The playback picture or TV programme from the

equipment connected through the recorder is

distorted.

, If the playback picture output from a DVD player, VCR, or

tuner goes through your recorder to get to your TV, the copy-

protection signal applied to some programmes could affect

picture quality. Disconnect the playback equipment in

question and connect it directly to your TV.

The picture does not fill the screen, even

though the aspect ratio is set in “TV Type” in

Video Setup.

, The aspect ratio of the disc is fixed on your DVD.

The picture is black and white.

, Check that “Line1 Output” of “Scart Setting” in Video Setup

is set to the appropriate item that conforms to your system

(page 77).

, If you are using a SCART (EURO AV) cord, be sure to use

one that is fully wired (21 pins).

Sound

There is no sound.

, The disc is dirty or flawed.

, Re-connect all connections securely.

, The connecting cord is damaged.

, Check the connections to the amplifier input.

, The input source setting on the amplifier is incorrect

, The recorder is in pause mode or in Slow-motion Play mode.

, The recorder is in fast forward or fast reverse mode.

, If the audio signal does not come through the DIGITAL

OUT (OPTICAL or COAXIAL) jacks, check the Audio

Setup settings (page 78).

Sound distortion occurs.

, Set “Audio ATT” in Audio Setup to “On” (page 78).

Sound is noisy.

, The disc is dirty or flawed.

, When playing a CD with DTS sound tracks, noise will come

from the LINE 2 OUT AUDIO L/R jacks, LINE 1-TV jack,

or LINE 3/DECODER jack. (See the separate booklet,

“Hookups and Settings.”)

The sound volume is low

, The sound volume is low on some DVDs.

The sound volume may improve if you set “Audio DRC” in

Audio Setup to “TV Mode” (page 78).

, Set “Audio ATT” in Audio Setup to “Off” (page 78).

The language for the sound track cannot be

changed.

, Multilingual tracks (main and sub) cannot be recorded on

DVD-RWs (Video mode), DVD+RWs, or DVD-Rs. To

record the language, select “Main” or “Sub” of “Bilingual

Recording” in Options Setup before recording (page 82). To

record both the main and sub sounds, record on a DVD-RW

(VR mode).

Playback

The disc does not play.

, No disc is inserted.

, A blank disc is inserted.

, The disc is upside down.

Insert the disc with the labelled side facing up.

, The disc is not correctly inserted.

, The recorder cannot play certain discs (such as a CD-ROM)

(page 37).

, The region code on the DVD VIDEO does not match the

recorder (page 36).

, Moisture has condensed inside the recorder. Remove the

disc and leave the recorder turned on for about half an hour

until the moisture evaporates (page 2).

, If the disc was recorded on another recorder, the recorder

cannot play the disc if it was not finalized (page 34).

The disc does not start playback from the

beginning.

, Resume play was activated (page 40). During stop, select

“Reset Resume” in the Tool menu, then press ENTER.

, You have inserted a disc whose Title menu or DVD menu

automatically appears on the TV screen when it is first

inserted.

The recorder starts playing the disc

automatically.

, The DVD VIDEO features an auto playback function.

Playback stops automatically.

, While playing discs with an auto pause signal, the recorder

stops playback at the auto pause signal.

,continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony RDR-GX7 Seite 85

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony RDR-GX7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info