Bedienungsanleitung Sony RDR-GX700 (Seite 43 von 116) (Englisch)

21283

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Recording

2 Press Z (open/close) to close the disc

tray.

Wait until “LOAD” disappears from the front

panel display.

Unused DVDs are formatted automatically.

3 Press [TIMER].

• If the Timer programming (VIDEO Plus+)

menu appears, press < to switch the

display to “Standard.”

4 Select an item using </, and adjust

using M/m.

“Date”: Sets the date.

The item changes as follows:

Today y Tomorrow y …… y Thu

28.10 (1 month later) y Sun (every Sunday)

y …… y Sat (every Saturday) y

Mon-Fri (Monday to Friday) y Mon-Sat

(Monday to Saturday) y Sun-Sat (Sunday to

Saturday) y Today

“Start”: Sets the start time.

“Stop”: Sets the stop time.

“Prog.”: Selects the programme position or

input source.

“Mode”: Selects the recording mode

(page 41).

“PDC/VPS”: Sets the PDC/VPS function. See

“About the PDC/VPS function” below.

• If you make a mistake, select the item and

change the setting.

5 Select “OK,” and press ENTER.

The Timer List menu (page 45) appears. The

TIMER REC indicator lights up on the front

panel and the recorder is ready to start

recording.

Unlike a VCR, there is no need to turn off the

recorder before the timer recording starts.

To stop recording during timer recording

Open the remote’s cover and press x REC STOP.

Note that it may take a few seconds for the

recorder to stop recording.

About the PDC/VPS function

PDC/VPS signals are transmitted with TV

programmes in some broadcast systems. These

signals ensure that timer recordings are made

regardless of any broadcast delays, early starts, or

broadcast interruptions.

◆To use the PDC/VPS function

Set “PDC/VPS” to “On” in step 4 above.

When you turn on this function, the recorder starts

scanning the channel before the timer recording

starts. If you are watching TV when scanning

starts, a message will appear on the TV screen. If

you want to watch TV, switch to your TV’s tuner

or turn off the PDC/VPS channel scan function.

◆To turn off the PDC/VPS channel scan

Press TOOLS and select “PDC/VPS Scan Off.”

To ensure that the PDC/VPS function works

properly, turn off the recorder before the timer

recording starts. This will automatically turn on

the PDC/VPS channel scan function while the

recorder remains off.

Rec Mode Adjust

If there is not enough available disc space for the

recording, the recorder automatically adjusts the

recording mode to enable the entire programme to

be recorded. This function is normally set to “On.”

To cancel this function, press TOOLS while the

Timer List is displayed. Select “Rec Mode

Adjust” and press ENTER. Select “Off” and press

ENTER.

If the timer settings overlap

Overlapped timer settings are shown as follows.

To store the setting as shown, select “OK.” The

programme that starts first has priority and the

second programme starts recording only after the

first programme has finished.

To cancel the overlapped timer setting, select

“Cancel.”

Timer - Standard

Set the timer manually.

Cancel

Date

VIDEO Plus+

To day

Start Prog. Mode

VPS

PDC

Stop

Fri 29.10 21:00-22:00 AAB SP

Fri 29.10 20:30-21:00 DEF SP

Timer

These timer settings overlap. Do you want to continue?

Cancel

,continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony RDR-GX700 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony RDR-GX700

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info