Bedienungsanleitung Sony RDR-HX525 (Seite 13 von 124) (Englisch)

625890

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Hookups and Settings

Step 1: Connecting the Aerial Cable and Set Top Box

Controller

Select one of the following aerial hookups. Do NOT set “Line3 Input” of the “Scart Setting” to

“Decoder” in the “Video” setup (page 99) when making connection A or B.

If the set top box receiver can output RGB signals

This recorder accepts RGB signals. If the set top box receiver can output RGB signals, connect

the TV SCART connector on the set top box receiver to the LINE 3/DECODER jack, and set

“Line3 Input” of “Scart Setting” to “Video/RGB” in the “Video” setup (page 98). RGB signal

images can be displayed on the TV screen, but cannot be recorded. Note that this connection

and setup disable the SMARTLINK function. If you want to use the SMARTLINK function

with a compatible set top box receiver, see the instructions supplied with the set top box

receiver.

If you want to use the Synchro Rec function

A SCART connection between the set top box receiver and the recorder is necessary to use the

Synchro-Recording function. See “Recording from connected equipment with a timer (Synchro

Rec)” on page 61.

Set “Line3 Input” of “Scart Setting” in the “Video” setup (page 98) according to the

specifications of your set top box receiver. See your set top box receiver’s instructions for more

information.

If you are using a B Sky B tuner, be sure to connect the tuner’s VCR SCART jack to the LINE

3/DECODER jack. Then set “Line3 Input” of “Scart Setting” according to the specifications of

the VCR SCART jack on your set top box receiver.

The set top box receiver control function can be used with hookup A or B. It allows the recorder

to control a set top box receiver via the supplied set top box controller. The recorder controls

programme positions on the set top box receiver for timer recording. You can also use the

recorder’s remote control to change programme positions on the set top box receiver whenever

the set top box receiver and recorder are turned on.

To use the set top box receiver control function, you need to connect the set top box controller

(page 24). After setting up the set top box receiver control, check that the recorder can correctly

control the set top box receiver (page 25).

b Notes

• If your aerial is a flat cable (300-ohm twin lead cable), use an external aerial connector (not supplied) to

connect the aerial to the recorder.

• If you have separate cables for AERIAL antennas, use an AERIAL UHF/VHF band mixer (not supplied)

to connect the aerial to the recorder.

• Synchro-Recording does not work with some tuners. For details, see the tuner’s operating instructions.

• If you disconnect the recorder’s mains lead, you will not be able to view the signals from the connected

set top box receiver.

If you have Hookup

Set top box receiver with an aerial output (or aerial and SCART

output)

A (page 14)

Set top box receiver with a SCART output only B (page 15)

No set top box receiver C (page 16)

Using the set top box receiver control function

,continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony RDR-HX525 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info