Bedienungsanleitung Sony RDR-HX525 (Seite 111 von 124) (Englisch)

625890

111

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

111

Additional Information

, There is not enough disc space for the

recording.

, The set top box was turned off.

, The set top box controller was incorrectly

connected (page 13).

, The settings in “Setup” in the Menu bar

have been changed (page 49).

, The recorder was in the process of dubbing

(HDDyDVD).

, The recorder was in the process of DV

Dubbing.

Recording does not stop immediately

after you press x REC STOP.

, It will take a few seconds for the recorder to

input disc data before recording can stop.

Recording does not stop after you press

, Press x REC STOP.

Timer recording is not complete or did not

start from the beginning.

, There was a power failure during recording.

If the power recovers when there is a timer

recording, the recorder resumes recording.

Should the power failure continue for more

than 1 hour, reset the clock (page 96).

, Other timer setting overlapped the timer

setting (page 61).

, Disc space was not enough.

, The PDC/VPS function is working.

Contents previously recorded were

erased.

, Data that is not playable on this recorder but

was recorded on a DVD with a PC will be

erased from the disc when the disc is

inserted.

, “Auto Title Erase” of the “Timer Settings”

in the “Recording” setup is set to “On”

(page 102).

The PDC/VPS function does not operate.

, Check that the clock and date are set

correctly.

, Check that the PDC/VPS time you set is the

correct one (there might be a mistake in the

TV programme guide). If the broadcast you

wanted to record did not send the good

PDC/VPS information, the recorder will not

start recording.

, If the reception is poor, the PDC/VPS signal

might be altered and the recorder might not

start recording.

, “PDC/VPS Scan Off” is selected (page 60).

, The PDC/VPS function may not work if the

GUIDE Plus+ host channel setup is not

complete.

, The PDC/VPS function does not work

when the GUIDE Plus+ data is being

downloaded.

Nothing was recorded even though you set

the Synchro-Rec setting correctly.

, You forgot to turn off the connected

equipment. Turn off the connected

equipment and set the recorder to Synchro-

Rec standby mode (page 61).

, The recorder was not set to the Synchro-

Recording standby mode. Press

c z SYNCHRO REC to have the recorder

stand by for recording. Make sure the

SYNCHRO REC indicator lights up on the

front panel (page 61).

, The equipment is not connected to the LINE

3/DECODER jack of the recorder.

, The recorder is connected to the TV output

jack of the connected equipment.

Synchro-Recording does not complete.

, The timer setting for the connected

equipment overlapped the recorder’s timer

setting (page 62).

, There was a power failure during the

recording.

Recording from the equipment

with a timer

,continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony RDR-HX525 Seite 111

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info