Bedienungsanleitung Sony RDR-HX750 (Seite 139 von 148) (Englisch)

35091

139

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

139

Additional Information

About i.LINK

The DV IN jack on this recorder is i.LINK-

compliant for digital video cameras. This

section describes the i.LINK standard and its

features.

What is i.LINK?

i.LINK is a digital serial interface for

handling digital video, digital audio and other

data in two directions between equipment

having the i.LINK jack, and for controlling

other equipment.

i.LINK-compatible equipment can be

connected by a single i.LINK cable. Possible

applications are operations and data

transactions with various digital AV

equipment. When two or more i.LINK-

compatible equipment are connected to this

recorder in a daisy chain, operations and data

transactions are possible with not only the

equipment that this recorder is connected to

but also with other devices via the directly

connected equipment.

Note, however, that the method of operation

sometimes varies according to the

characteristics and specifications of the

equipment to be connected, and that

operations and data transactions are

sometimes not possible on some connected

equipment.

b Note

Normally, only one piece of equipment can be

connected to this recorder by the i.LINK cable (DV

connecting cable). When connecting this recorder

to i.LINK-compatible equipment having two or

more i.LINK jacks (DV jacks), see the instruction

manual of the equipment to be connected.

i.LINK is a more familiar term for IEEE 1394

data transport bus proposed by SONY, and is

a trademark approved by many corporations.

IEEE 1394 is an international standard

standardized by the Institute of Electrical and

Electronics Engineers.

i.LINK’s maximum baud rate varies

according to the equipment. Three maximum

baud rates are defined:

S100 (approx. 100 Mbps*)

S200 (approx. 200 Mbps)

S400 (approx. 400 Mbps)

The baud rate is listed under “Specifications”

in the instruction manual of each equipment.

It is also indicated near the i.LINK jack on

some equipment.

The maximum baud rate of equipment on

which it is not indicated such as this unit is

“S100.”

When units are connected to equipment

having a different maximum baud rate, the

baud rate sometimes differs from the

indicated baud rate.

* What is Mbps?

Mbps stands for megabits per second, or the

amount of data that can be sent or received in one

second. For example, a baud rate of 100 Mbps

means that 100 megabits of data can be sent in

one second.

For details on how to dub when this recorder

is connected to other video equipment having

DV jacks, see page 84.

The DV jack on this recorder can only input

DVC-SD signals. It cannot output signals.

The DV jack will not accept MICRO MV

signals from equipment such as a MICRO

MV digital video camera with an i.LINK

jack.

For further precautions, see the notes on

page 84.

For details on precautions when connecting

this recorder, also see the instruction manuals

for the equipment to be connected.

Use the Sony i.LINK 4-pin-to-4-pin cable.

i.LINK and are trademarks.

About the name “i.LINK”

i.LINK baud rate

i.LINK functions on this

recorder

Required i.LINK cable

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony RDR-HX750 Seite 139

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony RDR-HX750

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info