Bedienungsanleitung Sony RDR-HX780 (Seite 123 von 140) (Englisch)

107538

123

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

123

Additional Information

You dubbed a title, but the title did not

appear in the HDD Title List.

, The title contained a copy protection

signal, so it was moved (page 131).

High-speed dubbing is not possible.

, The title cannot be dubbed at high speed

(page 67). Even if A-B erasure is

performed so that a title does not contain

mixed picture sizes, it is still treated as a

title with mixed picture sizes.

HDD/DVD Dubbing is not possible.

, The title cannot be dubbed (page 66).

HDD camcorder dubbing is not possible.

, An HDD camcorder which is not

supported by this recorder is connected

(page 70).

, The HDD camcorder is not set to the USB

connection mode (page 71).

, The HDD camcorder contains only the

contents that have already been dubbed to

the recorder when you are dubbing using

the ONE-TOUCH DUB button or

“Incremental Dubbing.”

The clock has stopped.

, Set the clock again (page 100).

The clock is wrong.

, Set the clock again (page 100). If you

cannot set the clock, wait until the clock

data is received and the clock is

automatically adjusted.

The timer indicator is flashing.

, The disc does not have enough space.

, Insert a recordable disc into the recorder.

, The inserted DVD is protected (page 38).

The clock does not appear in the front

panel display when the recorder is turned

off.

, “Front Panel Display” is set to “Off” in the

“Options” setup (page 115).

The remote does not function.

, Different command modes are set for the

recorder and remote. Set the same

command mode (page 115). The default

command mode setting for this recorder

and the supplied remote is “3 (Default

setting).” You can check the current

command mode in the front panel display

(page 115).

, The batteries are weak.

, The remote is too far from the recorder.

, The remote’s manufacturer code returned

to the default setting when you replaced

the batteries. Reset the code (page 22).

, The remote is not pointed at the remote

sensor on the recorder.

The recorder does not detect a USB

device connected to the recorder.

, Make sure that the USB device is securely

connected to the recorder (page 117).

, Check if the USB device or a cable is

damaged.

, Check if the USB device is on.

, The USB device is connected via a USB

hub. Connect the USB device directly to

the recorder.

Display language on the screen switches

automatically.

, When “Control for HDMI” is set to “On”

(default) in the “HDMI Output” setup

(page 115), the display language on the

screen automatically switches, according

to the language setting of the connected

TV, if you change the language settings on

your TV, etc.

The ‘BRAVIA’ Sync features do not

operate.

, Your TV is not compatible with the

‘BRAVIA’ Sync features.

, “Control for HDMI” is set to “Off” in the

“HDMI Output” setup (page 115).

, The recorder is connected to the TV via an

amplifier. Connect the recorder directly to

the TV.

Dubbing

Display

Remote control

Others

,continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony RDR-HX780 Seite 123

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony RDR-HX780

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info