Bedienungsanleitung Sony RDR-VX410 (Seite 2 von 128) (Englisch)

6388

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

WARNING

To reduce the risk of fire or electric

shock, do not expose this apparatus

to rain or moisture.

To avoid electrical shock, do not

open the cabinet. Refer servicing to

qualified personnel only.

The mains lead must only be

changed at a qualified service shop.

This appliance is classified as a

CLASS 1 LASER product. The

CLASS 1 LASER PRODUCT

MARKING is located on the rear

exterior.

CAUTION

The use of optical instruments with this

product will increase eye hazard. As

the laser beam used in this VCR-DVD

recorder is harmful to eyes, do not

attempt to disassemble the cabinet.

Refer servicing to qualified personnel

only.

This label is located on the laser

protective housing inside the

enclosure.

Notice for customers in the

United Kingdom and Republic of

Ireland

A moulded plug complying with

BS1363 is fitted to this equipment for

your safety and convenience.

Should the fuse in the plug supplied

need to be replaced, same rating fuse

approved by ASTA or BSI to BS1362,

(i.e., marked with or mark)

must be used.

If the plug supplied with this

equipment has a detachable fuse cover,

be sure to attach the fuse cover after

you change the fuse. Never use the

plug without the fuse cover. If you

should lose the fuse cover, please

contact your nearest Sony service

station.

Precautions

• This unit operates on 220 – 240 V

AC, 50 Hz. Check that the unit’s

operating voltage is identical with

your local power supply.

• To prevent fire or shock hazard, do

not place objects filled with liquids,

such as vases, on the apparatus.

VIDEO Plus+ and PlusCode are

registered trademarks of Gemstar

Development Corporation.

The VIDEO Plus+ system is

manufactured under license from

Gemstar Development Corporation.

Disposal of Old Electrical &

Electronic Equipment

(Applicable in the European

Union and other European

countries with separate

collection systems)

This symbol on the

product or on its

packaging indicates

that this product shall

not be treated as

household waste.

Instead it shall be

handed over to the

applicable collection point for the

recycling of electrical and electronic

equipment. By ensuring this product is

disposed of correctly, you will help

prevent potential negative

consequences for the environment and

human health, which could otherwise

be caused by inappropriate waste

handling of this product. The recycling

of materials will help to conserve

natural resources. For more detailed

information about recycling of this

product, please contact your local

Civic Office, your household waste

disposal service or the shop where you

purchased the product.

Precautions

On safety

Should any solid object or liquid fall

into the cabinet, unplug the recorder

and have it checked by qualified

personnel before operating it any

further.

On power sources

• The recorder is not disconnected

from the AC power source (mains)

as long as it is connected to the

wall outlet, even if the recorder

itself has been turned off.

• If you are not going to use the

recorder for a long time, be sure to

disconnect the recorder from the

wall outlet. To disconnect the AC

power cord (mains lead), grasp the

plug itself; never pull the cord.

On placement

• Place the recorder in a location

with adequate ventilation to

prevent heat build-up in the

recorder.

• If the recorder is brought directly

from a cold to a warm location, or

is placed in a very damp room,

moisture may condense on the

lenses inside the recorder and

cause damage to the video head,

tape, and the optical block. Should

this occur, the recorder may not

operate properly. When you first

install the recorder, or when you

move it from a cold to a warm

location, remove the disc and tape

and leave the recorder turned on

for about three hours before

operating the recorder.

• Do not place the recorder on a soft

surface such as a rug that might

block the ventilation holes.

• Do not place the recorder in a

confined space such as a bookshelf

or similar unit.

• Do not place the recorder in a

location near heat sources, or in a

place subject to direct sunlight,

excessive dust, or mechanical

shock.

• Do not place the recorder in an

inclined position. It is designed to

be operated in a horizontal

position only.

DANGER

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID DIRECT EXPOSURE TO BEAM

CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO THE BEAM.

KLASSE 3B SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG WENN GEÖFFNET. DIREKTEN KONTAKT MIT DEM

STRAHL VERMEIDEN.

SYNLIG OG USYNLIG LASERSTRÅLING AF KLASSE 3B VED ÅBNING. UNDGÅ DIREKTE UDSÆTTELSE FOR STRÅLING.

SYNLIG OG USYNLIG LASERSTRÅLING I KLASSE 3B NÅR DEKSEL ÅPNES. UNNGÅ DIREKTE EKSPONERING FOR STRÅLEN.

KLASS 3B SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD. UNDVIK ATT DIREKT EXPONERA DIG

FÖR STRÅLNINGEN.

AVATTUNA LUOKAN 3B NÄKYVÄÄ JA NÄKYMÄTÖNTÄ LASERSÄTEILYÄ. VÄLTÄ SUORAA ALTISTUMISTA SÄTEELLE.

CAUTION

VORSICHT

ADVARSEL

VARNING

VAR O!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony RDR-VX410 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony RDR-VX410

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info