Bedienungsanleitung Sony RDRHX1010 (Seite 44 von 116) (Englisch)

21299

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

To stop recording during timer recording

Open the remote’s cover and press x REC STOP.

Note that it may take a few seconds for the

recorder to stop recording.

About the PDC/VPS function

PDC/VPS signals are transmitted with TV

programmes in some broadcast systems. These

signals ensure that timer recordings are made

regardless of any broadcast delays, early starts, or

broadcast interruptions.

To use the PDC/VPS function

Set “PDC/VPS” to “On” in step 2 above.

When you turn on this function, the recorder starts

scanning the channel before the timer recording

starts. If you are watching TV when scanning

starts, a message will appear on the TV screen. If

you want to watch TV, switch to your TV’s tuner

or turn off the PDC/VPS channel scan function.

Note that if you turn off the PDC/VPS channel

scan function, the timer recording will not start.

To turn off the PDC/VPS channel scan

Press TOOLS and select “PDC/VPS Scan Off.”

To ensure that the PDC/VPS function works

properly, turn off the recorder before the timer

recording starts. This will automatically turn on

the PDC/VPS channel scan function while the

recorder remains off.

Rec Mode Adjust

If there is not enough available disc space for the

recording, the recorder automatically adjusts the

recording mode to enable the entire programme to

be recorded. This function is normally set to “On.”

To cancel this function, press TOOLS while the

Timer List is displayed. Select “Rec Mode

Adjust” and press ENTER. Select “Off” and press

ENTER.

If the timer settings overlap

Overlapped timer settings are shown as follows.

To store the setting as shown, select “OK.” The

programme that starts first has priority and the

second programme starts recording only after the

first programme has finished.

To cancel the overlapped setting, select “Cancel.”

To confirm, change, or cancel timer recording

See “Checking/Changing/Cancelling Timer

Settings (Timer List)” on page 48.

To extend the recording duration time while

recording

1 Press TOOLS during recording to select

“Extend Rec,” and press ENTER.

2 Press M/m to select the duration time.

You can set the duration in increments of 10

minutes, for a maximum of 60 minutes.

3 Select “OK” and press ENTER.

One Touch Timer

If you use the SMARTLINK connection, you can

easily display the timer programming menu.

When the TV is turned on or in standby mode,

press [TIMER]. The recorder automatically turns

on and the TV’s input is switched to the recorder.

The Timer programming menu appears.

Timer

These timer settings overlap.

Wed 21:00-22:00 AAB DVD SP PDC/VPS

Wed

29.10

29.10 20:30-22:00 DEF DVD SP PDC/VPS

OK Cancel

Do you want to continue?

Extend Rec. Time

Set the timer extend function.

Wed

Cancel

Extend Time

Off

DVD SP28.9 10:00-11:30 AAB

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony RDRHX1010 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony RDRHX1010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info