Bedienungsanleitung Sony RDRHX1010 (Seite 100 von 116) (Englisch)

21299

100

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

100

TV Pause does not work.

, You are recording to the HDD or the HDD is full.

The programme position cannot be changed

from the programme position you are

recording.

, Set the TV’s input source to “TV.”

Recording does not start immediately after you

press z REC.

, Operate the recorder only after “LOAD,”

“FORMAT,” or “INFOWRITE” disappears

from the front panel display.

Nothing was recorded even though you set the

timer setting correctly.

, There was a power failure during recording.

, The recorder’s internal clock stopped due to a

power failure that lasted for more than 1 hour.

Reset the clock (page 86).

, The channel was disabled after the timer

recording was set. See “Channel Setting” on

page 82.

, Disconnect the mains lead from the mains, and

connect it again.

, “PDC/VPS Scan Off” was selected in the

TOOLS menu (page 44).

, The programme contains copy protection signals

that restrict copying.

, Other timer setting overlapped the timer setting

(page 49).

, There is no DVD inside the recorder.

, There is not enough disc space for the recording.

, The recorder was in the process of DV Dubbing.

Recording does not stop immediately after you

press x REC STOP.

, It will take a few seconds for the recorder to input

disc data before recording can stop.

Recording does not stop after you press x.

, Open the remote’s cover and press x REC

STOP.

Timer recording is not complete or did not start

from the beginning.

, There was a power failure during recording. If

the power recovers when there is a timer

recording, the recorder resumes recording.

Should the power failure continue for more than

1 hour, reset the clock (page 86).

, Other timer setting overlapped the timer setting

(page 49).

, Disc space was not enough.

, The PDC/VPS function is working.

Contents previously recorded were erased.

, Data that has been recorded on a DVD with a PC

will be erased from the disc when the disc is

inserted.

, “Auto Title Erase” in the TOOLS menu (appears

when you press TOOLS while the Timer List

menu is turned on) is set to “On” (page 50).

, The title was updated and recorded over

(page 43).

The PDC/VPS function does not operate.

, Check that the clock and date are set correctly.

, Check that the PDC/VPS time you set is the

correct one (there might be a mistake in the TV

programme guide). If the broadcast you wanted

to record did not send the good PDC/VPS

information, the recorder will not start recording.

, If the reception is poor, the PDC/VPS signal

might be altered and the recorder might not start

recording.

, “PDC/VPS Scan Off” is selected (page 44).

Nothing was recorded even though you set the

Synchro-Rec setting correctly.

, You forgot to turn off the connected equipment.

Turn off the connected equipment and set the

recorder to Synchro-Rec standby mode

(page 50).

, The recorder was not set to the Synchro-

Recording standby mode. Press SYNCHRO

REC to have the recorder stand by for recording.

Make sure the SYNCHRO REC indicator lights

up on the front panel (page 50).

, The recorder is connected to the TV output jack

of the connected equipment.

Recording/Timer recording/

Editing

Recording from the equipment

with a timer

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony RDRHX1010 Seite 100

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony RDRHX1010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info