Bedienungsanleitung Sony RDRHX710 (Seite 88 von 116) (Englisch)

21325

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

b Note

Depending on the disc, “4:3 Letter Box” may be selected

automatically instead of “4:3 Pan Scan” or vice versa.

Pause Mode (HDD/DVDs only)

Selects the picture quality in pause mode.

Component Out

Selects whether or not to output video signals

from the COMPONENT VIDEO OUT jacks.

b Notes

• When you set “Line1 Output” to “RGB,” you cannot

set “Component Out” to “On.”

• When you connect the recorder to a monitor or

projector via only the COMPONENT VIDEO OUT

jacks, do not select “Off.” If you select “Off” in this

case, the picture may not appear.

Progressive Mode

DVD software can be divided into two types: film

based software and video based software. Video

based software is derived from TV, such as

dramas and sit-coms, and displays images at 30

frames/60 fields (25 frames/50 fields) per second.

Film based software is derived from film and

displays images at 24 frames per second. Some

DVD software contains both Video and Film.

In order for these images to appear natural on your

screen when output in PROGRESSIVE mode (50

or 60 frames per second), the progressive video

signal needs to be converted to match the type of

DVD software that you are watching.

You can fine-tune the progressive 525p/625p

video signal that is output when you press

PROGRESSIVE (“PROGRESSIVE” lights up).

Note that you must connect to a progressive

format TV using the COMPONENT VIDEO OUT

jacks (page 14).

Scart Setting

Sets the method of inputting/outputting signals

from the SCART jacks on the rear panel of the

recorder. Select an option for each of the items

below according to the combination of jacks and

methods that you are going to use.

Line1 Output

Selects a method of outputting video signals for

the LINE 1 – TV jack.

b Notes

• If your TV does not accept S-video or RGB signals, no

picture appears on the TV screen even if you select “S

Video” or “RGB.” See the instructions supplied with

your TV.

• You cannot select “RGB” when “Component Out”

above is set to “On.”

• SMARTLINK is available only when “Video” is

selected.

Auto The picture, including subjects

that move dynamically, is output

with no jitter. Normally select this

position.

Frame The picture, including subjects

that do not move dynamically, is

output in high resolution.

On Outputs the component video

signals. Select this when you want

to view progressive signals.

Off

Outputs no signals.

16:9

4:3 Letter Box

4:3 Pan Scan

Auto Automatically detects the software

type (Film-based or Video-based)

and selects the appropriate

conversion mode. Normally select

this position.

Video Fixes the conversion mode to the

mode for Video-based software.

RGB Outputs RGB signals.

Video

Outputs video signals.

S Video Outputs S-video signals.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony RDRHX710 Seite 88

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony RDRHX710

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info