Bedienungsanleitung Sony RDRHX710 (Seite 100 von 116) (Englisch)

21325

100

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

100

Recording does not stop immediately after you

press x REC STOP.

, It will take a few seconds for the recorder to input

disc data before recording can stop.

Recording does not stop after you press x.

, Open the remote’s cover and press x REC

STOP.

Timer recording is not complete or did not start

from the beginning.

, There was a power failure during recording. If

the power recovers when there is a timer

recording, the recorder resumes recording.

Should the power failure continue for more than

1 hour, reset the clock (page 86).

, Other timer setting overlapped the timer setting

(page 49).

, Disc space was not enough.

, The PDC/VPS function is working.

Contents previously recorded were erased.

, Data that has been recorded on a DVD with a PC

will be erased from the disc when the disc is

inserted.

, “Auto Title Erase” in the TOOLS menu (appears

when you press TOOLS while the Timer List

menu is turned on) is set to “On” (page 50).

, The title was updated and recorded over

(page 43).

The PDC/VPS function does not operate.

, Check that the clock and date are set correctly.

, Check that the PDC/VPS time you set is the

correct one (there might be a mistake in the TV

programme guide). If the broadcast you wanted

to record did not send the good PDC/VPS

information, the recorder will not start recording.

, If the reception is poor, the PDC/VPS signal

might be altered and the recorder might not start

recording.

, “PDC/VPS Scan Off” is selected (page 44).

Nothing was recorded even though you set the

Synchro-Rec setting correctly.

, You forgot to turn off the connected equipment.

Turn off the connected equipment and set the

recorder to Synchro-Rec standby mode

(page 50).

, The recorder was not set to the Synchro-

Recording standby mode. Press SYNCHRO

REC to have the recorder stand by for recording.

Make sure the SYNCHRO REC indicator lights

up on the front panel (page 50).

, The recorder is connected to the TV output jack

of the connected equipment.

Synchro-Recording does not complete.

, The timer setting for the connected equipment

overlapped the recorder’s timer setting

(page 51).

, There was a power failure during the recording.

The recorder automatically starts recording

when the satellite receiver is turned on.

, The Synchro-Rec function was activated. Turn

off the satellite receiver and cancel the Synchro-

Rec function (page 50).

The clock has stopped.

, Set the clock again (page 86).

, The clock stopped due to a power failure that

lasted for more than 1 hour. Reset the clock

(page 86).

The TIMER REC indicator is flashing.

, The disc does not have enough space.

, Insert a recordable disc inside the recorder.

Recording from the equipment

with a timer

Display

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony RDRHX710 Seite 100

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony RDRHX710

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info