Bedienungsanleitung Sony RDRHXD710 (Seite 97 von 124) (Englisch)

21389

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Settings and Adjustments

Downmix (DVDs only)

Switches the method for mixing down to two

channels when you play a DVD which has rear

sound elements (channels) or is recorded in Dolby

Digital format. For details on the rear signal

components, see “4. Displaying the Playing Time

and Play Information” on page 34. This function

affects the output of the following jacks:

– LINE 2 OUT R-AUDIO-L jacks

– LINE 1 – TV jack

–LINE 3 jack

– DIGITAL OUT (OPTICAL or COAXIAL)/

HDMI OUT (RDR-HXD910 only) jack when

“Dolby Digital” is set to “D-PCM” (page 97).

Audio Connection

The following setup items switch the method of

outputting audio signals when you connect a

component such as an amplifier (receiver) with a

digital input jack.

For connection details, see “Step 4: Connecting

the Audio Cords” on page 20.

Select “Dolby Digital,” “MPEG,” “DTS,”

“48kHz/96kHz PCM,” and “Audio(HDMI)”

(RDR-HXD910 only) after setting “Digital Out”

to “On.”

If you connect a component that does not accept

the selected audio signal, a loud noise (or no

sound) will come out from the speakers, and may

affect your ears or cause speaker damage.

1 Select “Audio Connection” in “Audio,” and

press ENTER.

2 Select “Digital Out,” and press ENTER.

3 Select “On,” and press ENTER.

4 Set the digital output signal.

• Dolby Digital (HDD/DVDs only)

Selects the type of Dolby Digital signal.

b Note

If the HDMI OUT jack (RDR-HXD910 only) is

connected to equipment not compatible with DOLBY

DIGITAL signals, the “D-PCM” signals will be

automatically output even when you select “Dolby

Digital.”

• MPEG (DVD VIDEO only)

Selects the type of MPEG audio signal.

Standard Normally select this position.

TV Mode Makes low sounds clear even if

you turn the volume down.

Wide

Range

Gives you the feeling of being at a

live performance.

Dolby

Surround

Normally select this position.

Multi-channel audio signals are

output to two channels for

enjoying surround sounds.

Normal Multi-channel audio signals are

downmixed to two channels for

use with your stereo.

On Normally select this position.

Off The influence of the digital circuit

upon the analogue circuit is

minimal.

D-PCM

Select this when the recorder is

connected to an audio component

lacking a built-in Dolby Digital

decoder. The surround effects of

output signals are determined by

the “Downmix” setting item in

“Audio” setup.

Dolby

Digital

Select this when the recorder is

connected to an audio component

with a built-in Dolby Digital

decoder.

PCM

Select this when the recorder is

connected to an audio component

without a built-in MPEG decoder.

If you play MPEG audio sound

tracks, the recorder outputs stereo

signals via the DIGITAL OUT

(COAXIAL or OPTICAL) jack.

MPEG Select this when the recorder is

connected to an audio component

with a built-in MPEG decoder.

Audio - Audio Connection

Digital Out : On

Dolby Digital :

48kHz/96kHz PCM : 48kHz/16bit

Audio(HDMI) : Auto

DTS :

MPEG : PCM

Off

D-PCM

,continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony RDRHXD710 Seite 97

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info