Bedienungsanleitung Sony rht g550 (Seite 42 von 52) (Englisch)

419672

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

If you experience any of the following

difficulties while using the stand, use this

troubleshooting guide to help remedy the

problem before requesting repairs. Should any

problem persist, consult your nearest Sony

dealer.

General

The power is not turned on.

• Check that the AC power cord (mains lead)

is connected securely.

If “PROTECTOR” and “PUSH POWER”

appears alternately in the front panel display.

Press ?/1 to turn off the stand, and check the

following item after “STANDBY” disappears.

• Is anything blocking the ventilation holes of

the stand?

After checking the above item and fixing

any problems, turn on the stand. If the cause

of the problem cannot be found even after

checking the above item, consult your

nearest Sony dealer.

Dolby Digital or DTS multi-channel sound is

not reproduced.

• Check that the playing Blu-ray Disc, DVD,

etc., is recorded in Dolby Digital or DTS

format.

• When connecting the Blu-ray Disc, DVD

player, etc., to the digital input jacks of this

stand, check that audio setting (settings for

the audio output) of the connected

component.

The surround effect cannot be obtained.

• Depending on the digital signal, the

surround processing may not work

(page 29). To check the input signal, press

INPUT SELECTOR on the stand and select

the input again. When the input is switched,

the input signal type appears in the front

panel display.

If “2.0ch” or “1.0ch” appears, the sound

source is stereo or monaural, and does not

contain surround sound.

If “5.1ch” appears, the sound source does

have surround sound, though not much

surround sound may be heard, depending on

the program or disk.

No sound or only a very low-level sound is

heard from the speakers.

• Press VOLUME + and check the volume

level.

• Press MUTING or VOLUME + to cancel the

muting function.

• Press SOUND FIELD +/– and check the

selected sound field.

• Depending on the source, the sound effect of

the speakers may be less noticeable.

Sound lags behind the TV image.

• Set “A/V SYNC” to “OFF” when “A/V

SYNC” is set to “ON.”

Connected components

There is no sound or only a very low-level

sound no matter which component is selected.

• Check that this stand and components are

connected correctly and securely.

• Check that both this stand and the selected

component are turned on.

• Check that the volume is not set to the

minimum level.

• Press MUTING to cancel the muting

function.

There is no sound from the selected

component.

• Check that the component is connected

correctly to the audio input jacks for that

component.

• Check that the cords are fully inserted into

the jacks on both the component and this

stand.

• Check that the component is selected

correctly.

Sound is interrupted or there is noise.

• Check “Formats supported by this stand”

(page 45).

Additional Information

Troubleshooting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony rht g550 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony rht g550

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info